1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Turn signal/running lites

Discussion in 'XJ Technical Chat' started by DaveXJ, Apr 28, 2009.

  1. DaveXJ

    DaveXJ Member

    Messages:
    191
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Southern MN
    Ok, i am going to replace my front bulb sockets with new 3 wire ones so i can have both running and turn signals using a 1157 bulb. I also have a bad socket in the left rear signal. I found replacement sockets that work for BOTH! I will post the company that makes them and you can search your local auto parts store or ebay for them. They come with a white plastic cover on them. Just break of the plastic cover leaving you with just the metal socket. Then slip the new ones into the rubber boot in the blinker housing. Not bad for the cost compared to a whole new lite housing and all.

    Dorman conduct-tite #84809 (3 wire/ upgrade to running and signal-fronts)
    Dorman conduct-tite #84808 (2 wire/single filament for replacing bad front or rear to original blinkers only).

    www.dormanproducts.com
     

    Attached Files:

    DaveXJ, Apr 28, 2009
    #1
  2. DaveXJ

    DaveXJ Member

    Messages:
    191
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Southern MN
    This is Napa auto's part #'s
    ECHLS6253 - 3 wire for dual element 1157 bulbs
    ECHLS6253 - 2 wire for single element 1156 bulbs
     
    DaveXJ, Apr 30, 2009
    #2

Share This Page