1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

noob

Discussion in 'XJ Modifications' started by chevydealertech, Aug 29, 2010.

  1. chevydealertech

    chevydealertech New Member

    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    I recently bout a 1998 xj600 had 10000 miles on the clock I put about a additional 2600 miles on in short order. I installed a exhaust system and a jet kit (dyno jet) over the weekend now after installing it has a slight hesitation during roll on most noticeable when hot (rich Im thinking) ive tride all jets in the kit with worse out comes so I'm think of going back to the stock jet just leaving the adjustable needles in will this work? what should I set the needles at.
     
    chevydealertech, Aug 29, 2010
    #1
  2. streetbrawler750

    streetbrawler750 Member

    Messages:
    608
    Likes Received:
    3
    Trophy Points:
    18
    Location:
    Minnesota
    Go with the best performing jet and click the needle up, meaning the next ring down, to position the needle higher at its lowest, if that makes sense. Shimming the needle SHOULD help with hesitations. Off idle and mid range.
     
    streetbrawler750, Aug 29, 2010
    #2

Share This Page