Spoke wheels for your XJ

I don't know if this was covered on the forums but I think this would be helpful in getting the spoke wheels on our XJs.
http://www.yamaha-triples.org/forums/th ... ightmode=1

 

That will work on the XJ1100 Maxim only.
Not the 650-750-900 size.

 

for those who want spoked wheels on all the xj range.. look at a yamaha virago... thats what I did.. and they fit like a dream.

 

why would you want spoke wheels.

i'm wishing my bike had mags instead of spokes.

 

The grass is always greener

 

i don't see any advantage to having spoke wheels.
flat tires can't be fixed easily. and the added cost of having tubes and rubber rim rings to keep the tubes from poking on the spokes.

over on the suzuki thread. people are taking the spoke wheels and converting them to tubeless. or junking the spokes in place of mags.


the greener grass is mags. not spokes. if i get a flat tire in the middle of nowhere. i have to be towed home. if a mag gets flat. i have a repair kit and pump to get them back on the road again.

 

If I get a flat tyre on my spoked wheel in the middle of nowhere I have a repair kit, a spare tube and a pump to get me back on the road again

I like spoked wheels mainly for a looks thing but in a lot of cases they are also lighter

 

One of the big drawbacks to a tube type tire is if you get a puncture it goes flat right now. Tubless tires usually leak down slower, especially if the offending item stays embedded in the tire.

I had a customer with a 3" deck screw completely driven into his tubeless tire. It wasn't even leaking.

 

I prefer the look of a spoked rim, and since I'm building a Cafe Racer.

 

The spokes shine up nice !!

 

what about the jack you need to lift the bike off the ground. and those tools to pull the tire off the bike.

i've got 12 sockets and usb ports on my bike. anyone needs car electricity i've got it. with a tubeless tire i've got plugs and a electric pump. no need to pull the tire off. and there were about 4 flats on all the rides i did last year. even myself needed some air in the middle of nowhere.

 

I can see one benifit right away, spoked wheels mean spoked hubs. The choice of rim size is is much more abundant and many of us would like wider rims to go with our wider tires. The second is practical, if we join the rest of the world and go to 17's then we have a much wider selection of tires, (and prices also) I'd rather have tubeless but have paused to think about swapping to 5x16 & 3.5x17 rather than 2.15x18 & 1.85x19 wheels for 140 mm width rear and 110mm width front tires. You can put those width tires on the stock wheels but they look kinda balloonish, (shades of the 60's & schwinn stingray styling) Lol.
Anyway, I ride mine almost everyday, weather permitting, and really don't like the idea of a sudden blowout at freway/turnpike speeds. but I think it would look cooler, especially with short shocks in back. Thats my 2cents.

 

Evolution, gentlemen, plain and simple.

In most cases, the cast wheels are lighter than wire wheels; cast wheels are inherently stiffer; they're maintenance-free (spokes come loose and need to be attended to properly to keep from pulling the wheel out of true) and most importantly for the manufacturers, they're WAY cheaper to manufacture than spoked wheels.

Personally, I like the appearance of both, depending on the application; and I'd love to fit a set of spoked wheels to one of my 550 Secas. But it would actually be a step backward, technology-wise.

De - evolution.

 

More evidence: Take a look at this bike.

It was certainly NOT built for looks, it was built for function, pure and simple. It has a cast wheel on the front because it's lighter and stiffer than the original wire spoked wheel that came on the bike. Very popular dirt tracker mod. The rear gets left as-is because there's no real advantage in a swap there. (There's no front brake because this is a real flat-tracker, not a street bike.)

 

Which quite often allows you to ride with the tyre low and pressure and wreck it anyway

Do they not have centre stands where you come from :lol:

Only need two tyre levers and a crescent for the rest

Perhaps if you're talking modern cast wheels but looking (and weighing) spoked and cast wheels from the XJ era I would say not

Spoked wheels also don't need much checking for on road use

 

I love my center stand, enough to avoid pipes that would interfere with it.

 

I consider them ruined when they get a puncture, tube or tubeless.

What I meant is a tubeless tire is much less likely to suddenly deflate and result in a loss of control.

 

i've been looking at picking up some harley spoke wheels.. front are dual disk..so i don't know if they'll fit exactly on my 400.. might just have to take one off... and rear is belt drive and disk (mine is drum) so i gotta figure out a sprocket and how to mount a brake caliper to the frame..

just wondering do i need the harley brake caliper and brake pedal assembly or does it matter if i get a different one? any xj's run a rear disk?
should my front caliper work with any disk brake?

 

You could use a sprotor brake, just need to add a MC and line.

 

for real... awesome... i'll look into it...