Quick carb question

While putting my float bowls back together I realized that I don't know which spray nozzles go where. There are three nozzles in the bowls. The large diameter one, the one on the pedestal that protrudes out towards me and has a washer on it, and the third one that sits low in the bowl. I took the washer off the one and then realized that one is stamped with 40 and the other is stamped with 110 and I have no way of knowing which is which. Can anyone help me out with this please? Thank you.

 

The one that is marked with a 40 is your pilot just. The 110 is the main jet.
The other is where the needle and seat go for your floats.

The main jet goes in the middle with the brass washer.
The Pilot jet goes just below the main.
And the needle and seat goes between the float posts.

I think I understand what you were asking. If you need more info write back. Good Luck!

 

That's exactly what I was looking for, thank you very much nsosh5