1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

gotta be smarter than the bike.

Discussion in 'Hangout Lounge' started by FastMaxim82, Apr 7, 2009.

  1. FastMaxim82

    FastMaxim82 Member

    Messages:
    168
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Tarentum, north of pittsburgh, pa
    so i swapped out my handle bars since they were bent. I had to re adjust the mirrors which were siezed of course. well got the right one apart decent. the left was quite difficult but came with some persuasion. Then i got the bright idea that a tap and die would clean up the threads so i could use some anti-seize to prevent them from galding in place again. well this time the left one went easy. i spent 45 minutes getting the die on the right one the another 30 minutes getting the tap into the hex piece. that one turned out quite poorly. 3 hours later i remember that the right mirror mount is left hand thread! guess i'll buy those new mirrors now, lol. The bike won this fight. The saddest part is that i knew it was left hand thread when i took it off and I'm an automotive technician. should've known better. luckily the new mirrors i found are only like 30 bucks on jcwhitney.
     
  2. PainterD

    PainterD Active Member

    Messages:
    2,649
    Likes Received:
    5
    Trophy Points:
    38
    Location:
    St. Cloud, Minnesota
    I bought some after market mirrors that don't have the left hand thread for the right mirror also. I just tapped the right hole with a tap to fit in right hand threaded mirrors and it worked very well. Yamaha seems to be the only brand that uses the left-hand threads for the right-hand mirror.
    I just about broke the mirror stem off the first Yamaha (XS650) I owned, not knowing they were left hand threads! I finally figured it out before I twisted the stem completely off. Live and learn.
     
  3. schmuckaholic

    schmuckaholic Well-Known Member

    Messages:
    2,260
    Likes Received:
    42
    Trophy Points:
    48
    Location:
    California
    I'll cop to not being the brightest person on the block.

    Yesterday, it being my "Saturday", I decided I was going to do *something* with the bikes. Took the 750 for a spin (I was surprised that it actually started), came back and thought I'd do that fine-tune sync I'd been meaning to do with the X for months and months.

    I reassemble my manometer, put water in it; take the bike for a spin to warm it up. Come back, hook up the tubes to 3/4; water gets sucked into the engine. Well, I guess my one-gauge sync needs a bit more syncing, doesn't it?

    Grab one vacuum gauge, hook it up, tweak it a bit closer. Put some more water in the tubes, hook it up... ah, that's better. A nudge on the sync screw, and they're even. So far, so good.

    Move over to 1 and 2. Started having trouble keeping the engine running. Soon after, it wouldn't even start. Thought I'd tweaked the sync screw so badly that I'd have to pull the carbs and bench-sync again; bear in mind that pulling the carbs on the X is a project in itself. Then it dawned on me what the problem was.

    1) Rather than use an aux fuel tank, I was using the bike's tank.
    2) Which has a vacuum operated petcock.
    3) Which had the vacuum hose plugged into the #2 carb.
    4) ...which I unhooked to plug in the gauges.

    I ran the carbs out of gas. :oops:
     
  4. TheHound

    TheHound Active Member

    Messages:
    1,156
    Likes Received:
    1
    Trophy Points:
    36
    Location:
    Scotia, NY
    Starting to look like a bunch of dull tools in this shed. :wink:
    hehe
    We've all been there, as I read Fastmax's post I was yelling no, no, it's left hand threaded.
    If you didn't know the trip reset knob is also left hand threads.
     
  5. FastMaxim82

    FastMaxim82 Member

    Messages:
    168
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Tarentum, north of pittsburgh, pa
    ya, i knew it was left hand thread. it just never sunk in, lol
     

Share This Page