Diggin into the electrics

Hey all,

Finally got warm enough to get back out and work on the bike a bit. Got it to run for maybe thirty seconds last fall before it got to cold to be workin outside in an unheated garage. Now I want to replace the fuse block before I try starting it again. So today I picked up a new battery, fuse block, female spade connectors, and fuses. Just wondering if the fuse block I picked up will work or not. Says its good to 30 amps per cicuit. Only thing I'm not sure on is the common input stud. I hope it will work but if not could someone please let me know. Any help is greatly appreciated. Here's a link to the one I picked up. http://www.cooperbussmann.com/images/b7 ... 85efe9.JPG

 

It's not going to work without the addition of a relay.............otherwise, everything will be "hot" all the time!

You need a 6-circuit in/out style box if you want to replace your original box correctly.

 

Thanks for the quick response. I'll get a different one.

 

I brought one such fuse box lately... one minute and I'll get the link

 

Here's my thread on a different forum:
http://forums.ninja250.org/viewtopic.ph ... 190#714190



My concern would be the height of the cover... of course I don't think you'd need the cover anyhow.

Here it is (MAKE SURE you pick the 6 position one from the list)
http://www.centechwire.com/catalog/panels/fb4.shtml