yics tool, has any one got one

has any one got one of those tools, and would u sell it, and post it to the uk, as my bike runs like crap,until she warms up,


are these any good,and do they work, ta dave

 

Dave, you could get away with a strip of oil soaked rag, stuff a bit in from each side & don't let it start cooking.

 

I know Chacal sells em, you may try and contact him and see how much to send it to the UK

 

You don't need a YICS "TOOL"
How often will you use it? Once every season. If that?

The YICS Passage is Capped at each end.
Essentially, its just a long, straight, hole ... drilled through the Block.
"Stuff it up" ... and the Carbs are isolated.

Cut a long, narrow (1/2" or less) strip of T-shirt.
Lube the material with a "Safe" non-flammable agent.
(Vegetable Oil or Marvel Mystery Oil)
You get a FREE YISC Tool.
<>+<>+<>+<>+<>+<>+<>+<>
http://xjbikes.com/Forums/viewtopic/t=4 ... +yics.html

 

so does it make the air flow better, or is there a stupid guide to set up the carbs, as when shes warm, she splutters alittle, but when cold its really horrible, as it works on 2,then goes on 4, carbs all cleaned. maxim 750?

 

Here ya go. $25 plus shipping.

http://cgi.ebay.com/ebaymotors/YICS-Eli ... ccessories