1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

'81 550 Seca bogging down then stalling

Discussion in 'XJ Technical Chat' started by steve06118, Sep 9, 2009.

Page 2 of 2
  1. bigfitz52

    bigfitz52 Well-Known Member Premium Member

    Messages:
    21,283
    Likes Received:
    418
    Trophy Points:
    83
    Location:
    Rural SE Michigan 60 miles N of Motown
    Either that or the float levels are way off. You said you replaced the float seats; did you then check/adjust the float levels using gas (the "clear tube" method?)
     
    bigfitz52, Sep 29, 2009
    #21
  2. steve06118

    steve06118 New Member

    Messages:
    17
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    CT
    I definitely cleaned the carbs till all passages were clear. I did look through each jet at a light to check for any debris and all were cleaned properly. Also, I dont think this is a petcock issue as it is brand new and I believe my vacuum line is good. My bike will rev really high with the choke lever open but will stall as soon as I start to close it. Thanks for the comments though.
     
    steve06118, Sep 29, 2009
    #22
  3. bigfitz52

    bigfitz52 Well-Known Member Premium Member

    Messages:
    21,283
    Likes Received:
    418
    Trophy Points:
    83
    Location:
    Rural SE Michigan 60 miles N of Motown
    check the float levels.
     
    bigfitz52, Sep 29, 2009
    #23
  4. steve06118

    steve06118 New Member

    Messages:
    17
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    CT
    OK I'll check the levels. I appreciate all your help bigfitz. That tutorial on the valve shim job was a huge help. Crystal clear instructions. :)
     
    steve06118, Sep 29, 2009
    #24
Page 2 of 2

Share This Page