selling a whole bunch of 82 maxim parts

Ive got alot of parts that im sure you'll will put to good use.
ive got a instrument cluster that reads 5500 miles,
also have ignition with key and gas cap,front brake caliper and brake pads,head light and bracket,have most of the electronics including harness intact and uncut, ihave a stator(alternator) , starter, pretty much a whole bike minos the motor and front forks and handle bars. taking resonable offers on all of it. thanks for looking
Nick

 

I would like to know how much for the rear grab bar? and carbs if you still have them?

 

I'd be interested in your side covers. Is this a 650?

 

throw me prices on this stuff guys, i need some cash and just trying to make a little money from this extra bike. throw me some numbers and as long as there reasonable i can take care of the shipping.

 

Hey I was curious if I could maybe swing by see what you have and bring some cash with me, I an just about 1 1/2 to the north of you up by Cedar Point, if your interested or you wouldn't mind let me know, thanks./.....

 

yea that would not be a problem , however this weekend is bad i have a wedding im in. Its in town but i will be in and out in the morning sat and all day sunday. later sat may work,so just let me know.

 

Is this a 650 or 750 bike. If a 750. I would take the guage cluster if still for sale.

 

What condition are the rubber boots you have on it. The ones that attach to the carbs.

 

they are in good condition i was fighting carb issue and as a preventative step i coated teh outside of the boot with silcone just to make sure it was not leaking but they are in great shape other than that...

 

I have an 82 maxim 550. Just wondering if your brake a cluth levers would fit my bike. Thanks.

 

Would you be willing to sell just the carb covers? the silver caps that go on top? if so , what conditiona re they in?

 

what are you lookin to get outta the starter?

 

throw me some prices guys... ive got these parts laying around

 

50 shipped?

 

sure the ones off the bike are litely rusty, but then ill have a set of carbs i cant do anything with... let me know what you might pay for the whole setup or just for the covers.

 

i'm gonna pass

 

what do you want to spend? include shipping i dont care not real sure as to what these go for used.

 

well, I don't wanna insult you, but the ones I have seen have gone for 25 to 30 bucks shipped. that is on e-bay. I'd give you 25 shipped.

 

done send me you shipping info and ill get it out to you on monday i have paypal...

 

thanks, noob mistake.

 

How much for the ignition control module shipped to Virginia, zip 22602? I have one coming off of ebay I paid 21 total including shipping but am totally unsure of its condition. From what I have read of your problems with your bike, I am sure yours is in good shape and would like to have it in case the other one isnt any good... Let me know total please..

thanks

 

hello
I would be interested in the wire harness if its a xj750j
thanks

 

sorry man all ive got is a 82 maxim 650 to part out... thanks for the intrest though im sure there is someone else on here who can help you. or ebay?
Nick

 

do you have the right foot peg and will it fit an 85 maxim 700?

 

i will check pretty sure i do.
Nick

 

Need the airbox chrome end "covers" (right and left side) and the 2 swingarm chrome caps............

 

I noted someone else asked about the grab bar "sissy bar" that goes around the bottom of the seat. The one I have on my 82 XJ 650J is broke on both sides where the shocks mount. I would be intrested if its in fair condition and the other fellow does not take it.

Not sure what you would want for it, and don't wish to insult. $35.00 shipped reasonable? If not let me know what is reasonable to you.

 

Do you have the engine guards/crash bars? if so what shape?

 

Hey, Soslow. Check your PM's man! I'd really like to know if you have the tach or not. If you want mo' money or something, say so.

I'm lost in rev-land without my tach! Help, help, help! :wink:

 

sorry guys i have been in kansas for a week thus the lack of responce to your pm's. i will responde later today once i read through all of the parts requested. from what it looks i will be able to fill all requests.

 

Looks like your not in Kansas any more....Sorry couldn't hold back.

 

justwondering what you had left i'm in logan about an 1 away if you would let me know whats left and i'll see what i can use

 

ive got a chassis, some electrical peices , stator , other little bits some crome pieces off the front end i.e. the heak light and mount also have a wind screen sissy bar seat? bunch of stuff.brake caliper,let me know what you need and ill see what ive got. oh yea a motor that has a bad starter clutch , motor runs great just the starter clutch ive priced the parts to fix it and its about 40$ but to de assemble the motor and fix was going to be like 800 i just swapped motors. thats were all the parts came from.

 

Do you still have the seat, what condition is it in and what do you want for it including shipping to zip 03833

 

Wiring harness, please, if it's not already spoken for and in acceptable condition.

 

Hey saw you had the windscreen also, what do you want for that ?

 

IM not sure i think it is a turbo brand? it doesnt have any cracks or chips i dont know what they are worth throw me a number with shipping and im sure we can make it happen. i also have the factory sissy bar in great shape.

 

yes i have the seat im not sure what they are worth so throw me a price with shipping.

 

side covers?

 

i have a set of black ones they have a few scratches nothing major though.

 

I have an '82 750 Maxim that needs a new airbox cover...not sure if it's the same as the 650, but I'll take a chance. Do you still have the box and cover?

Tim