1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

1985 Maxim xj700n part out unless...

Discussion in 'For Sale, Trade/Swap, Wanted' started by mcrwt644, May 20, 2010.

  1. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    by the weekend of June 4th, the issue is not sorted, I am parting an extremely nice 85 maxim xj700n. I believe if this happens, the exhaust is already spoken for. Here are pictures BEFORE I got it. The luggage rack is MINE and not on the bike. The backrest is available, but has no pad on it. It has ~11k on it. Guages are PERFECT, tank is PERFECT inside and out, Seats are oem and nice. Tires are probably staying with me as they have 35 miles on them. I will keep an eye on this post. Post up what you need and send me a sane reasonable offer. I'm going to lose money on this, but it's got to go, I'm tired of looking at it. Btw, the engine has 120psi across the board. Anyone semi local? I'll take 850 for the bike whole, minus tires. And yes, I had it running, took it for a 35 mile ride, rode like a champ.

    Mike, if you know someone there, I'll deliver it....

    I will add updated/clean bike pics later today...
     

    Attached Files:

  2. jeffydv

    jeffydv New Member

    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    1
    I could use the speedometer and the chrome air box covers. for around $35? Let me know. Thanks
     
  3. Gortty_Pilot

    Gortty_Pilot New Member

    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Shawnee, KS
    I'm interested in the engine guards if your bike doesn't work out.
     
  4. chuckles_no

    chuckles_no Member

    Messages:
    660
    Likes Received:
    1
    Trophy Points:
    16
    Location:
    wisconsin
    You're going to get rid of it in parts and wish you'd kept it. Didn't you restore this bike?
     
  5. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    The guages will go as a set with the covers. And 35 is a bit low. I'll check for the airbox covers. I have a few sets.

    This bike will NOT run. DesingerMike has the carbs right now and he's checking into them to see if I missed something. If he can't find something, it's being parted, and probably junked.
     
  6. schooter

    schooter Active Member

    Messages:
    3,048
    Likes Received:
    2
    Trophy Points:
    38
    Location:
    Elkton, Michigan (its in the thumb)
    damn- if you werent so far away I'd snatch the engine....and then RESTORE my 700...


    btw- i'm going to wal fart to get the check Tonight... it's raining so i dont have to work til the cows come home.... can you pm me your adress- I dont have the box you shipped my my regulator in.

    lol, and about the regulator- mine turned out not to be bad i guess- i was riding the bike for awhile without it and then it quit because it was running off the battery, so i char4ged it up and said what the heck, plugged in my regulator, stayed running, turned it off and it started right up.
     
  7. Swissjon

    Swissjon Member

    Messages:
    280
    Likes Received:
    1
    Trophy Points:
    16
    Take a closer photo of the gagues etc please.. Are they MPH or KPH? I might be interested for the right ones? Only if they'd work on a XJ900 85 frame... US$60?
     
  8. jeffdodge

    jeffdodge Member

    Messages:
    143
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    North East PA, USA
    How much for the handlebar controls.. I only need the left one, but Ill take both if you dont want to part them.
     
  9. koolaid5

    koolaid5 Member

    Messages:
    788
    Likes Received:
    1
    Trophy Points:
    18
    Location:
    Chambersburg, PA
    I'm interested in the tank. Let me know how much you want for it shipped to 28348.
     
  10. Maxim-X

    Maxim-X Well-Known Member

    Messages:
    1,696
    Likes Received:
    76
    Trophy Points:
    48
    Location:
    London Ontario Canada
    Are the mirrors the original ones with Yamaha on the back? Plus do you know if the crash bars will fit the 750 Maxim-X Canadian model? I know someone already asked about the crash bars, but haven't seen any updates on what's been sold.
    Prices and shipping costs to London Ontario Canada, U.S.P.S. please, no UPS or FED-EX as they crucify us on brokerage charges.
    Example: $10.00 part, $50.00 brokerage fee! 8O


    Cheers, Graham
     
  11. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    the mirrors are oem, not perfect, but nice.
    the guages are mph, and I don't know if they will fit an 85 xj900. I guarantee you, the guages are PERFECT.
    I will let you know on the tank. The only thing holding this up is whether or not it will go after desingermike takes a gander at it...2 weeks
     
  12. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    pics for those who asked, this is the bike after the clean up today, ok, maybe not spotless, but better than it was.
    the tank has NO dents and the pain is extremely nice, yet not perfect
    Guages are perfect, no wrinkles, scratches or anything.
    Crash guards are spoken for by a forum member that pm'd me, and they are flawless. Exhaust came off my bike, and is extremely nice. If I can't get this thing going in 2 weeks, I'll disassemble and take better pics then.
    If you want a picture of something, pm me with your e mail address. The tci/rectifier are all good. Seats are original oem. Bars are perfect.
     

    Attached Files:

  13. Swissjon

    Swissjon Member

    Messages:
    280
    Likes Received:
    1
    Trophy Points:
    16
    Damn. I really like those gagues, but MPH is not going to cut it, thanks anyway. :(
     
  14. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    that's too bad, because they are about as mint as you can get.
     
  15. Swissjon

    Swissjon Member

    Messages:
    280
    Likes Received:
    1
    Trophy Points:
    16
    Yeah :( I can see that, but the Swiss laws prohibit me from using a clock with miles for the odeometer.. I could have changed the background of the speedo, I'm sure, but I can't change the trip counter.. :(

    Oh well.. Good luck with the sale..
     
  16. dbikers

    dbikers Member

    Messages:
    162
    Likes Received:
    1
    Trophy Points:
    18
    Location:
    grand blanc, mi
    hey mcrwt644...pm'd ya
     
  17. DaPuff

    DaPuff New Member

    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    East Peoria, IL
    I'm interested in the handlebars. I'll send a PM on the price.
     
  18. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    I think I'm going to ebay with it. I've had some ok offers, and some down right insulting ones. I have to recover the cost of the bike, or close to it.
     
  19. Shorts42

    Shorts42 New Member

    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Allentown, Pa
    You should just post what you think is reasonable for some of the items, I would be interested in the seat and speedometer gauges.......whats fair to you?
     
  20. lllintothevoidlll

    lllintothevoidlll New Member

    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Michigan
    What would you want for the stator (if it is tested and working) as well as the rear left turn signal?
     
  21. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    carb diagnosis has not happened. I will post a new thread with results....I've been up to my elbows in x engine work
     
  22. RickCoMatic

    RickCoMatic Well-Known Member

    Messages:
    13,843
    Likes Received:
    65
    Trophy Points:
    48
    Location:
    Massachusetts, Billerica
    That X-Bike is way too nice to Part-out.

    Detail the whole Bike and have Wizard or BigFitz take an amazing photograph of it and put it on Ebay.

    Be honest.
    Set a starting price where you break-even.

    Somewhere, there is a young guy looking for your Bike.
    Not just any Bike that will come along.
    A Maxim-X
    He's probably asked owners of Bikes he's serviced if they want to sell theirs.
    Because this Wrencher keeps their Bike tip-top they don't sell.

    You start parting it out and it becomes a non-entity.
    Nobody wants it without what you sold off it.
    And another crying shame starts collecting dust.
     
  23. iron9cross

    iron9cross New Member

    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    1
    Hey everyone, I have 85 xj700x and i need a start button.
     
  24. donhoe

    donhoe Member

    Messages:
    104
    Likes Received:
    1
    Trophy Points:
    18
    Location:
    Grand Forks, ND
    my brother is looking at an 86 that is for sale cheep, but it's missing the airbox, will this one work, and how much?
     
  25. lllintothevoidlll

    lllintothevoidlll New Member

    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Michigan
    Got a stator, thanks though :)
     
  26. brille

    brille New Member

    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Hi, Is the tank still for sale? Plz contact me on brille@gmail.com
    Or anyone else whos got a Maxim tank for sale
     
  27. lllintothevoidlll

    lllintothevoidlll New Member

    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Michigan
    Do you still have the speedometer? If so, what's the asking price?
     
  28. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    My apologies for not updating this sooner. I've been busy installing and tuning x's engine and carbs.

    Designer_mike has my carbs. We have a carb clinic the end of this month. We hope to get the stupid thing running by then. If not, it's being parted with the exception of a few parts that I'm keeping for myself.

    The wheels and tires are staying with me. I want them on my X. The crash bars, unless someone gives me a smokin price, are staying. I do have a pair of Chrome bars that are in great shape I'm willing to part with though.

    I have gotten royally screwed on shipping, so the parts I list will not include shipping.

    The guages go as a set $100
    Carbs are new looking $100
    Handle bars are in great shape $30
    Air box is very good, for anyone that has an x, this will work, but you will need different carb to airbox boots. $25
    Both seats $50
    Tank $100l
    Key set, complete, $30
    CDI $30
    Rectifier $20r
    anything else, go to my profile and e mail me, put xj700n in the subject and what you want as well. Thanks, I'm going to take a beating, but oh well
     
  29. odiosus

    odiosus New Member

    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    1
    HELLO, I AM INTERESTED TO TANK.
    IT'S THE TANK OF 700X?
    HOW MUCH IS SHIPPING TO ITALY?
     
  30. odiosus

    odiosus New Member

    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    1
    I HAVE SEEN THE MODEL NOW ... THE MODEL IS THE SAME.
    Notify HOW MUCH IS SHIPPING TO ITALY, and paid with PAYPAL
    CONTACT ME IN PRIVATE.
     
  31. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    FYI...Designer_mike found a few issues with the carbs and has float levels set correctly. The oem 'n' needles would not hold a float height...He said the springs in the needles seemed too weak even though they were oem.

    He replaced them with 'x' needles and compensated for the longer length by re adjusting the float levels. I will have the carbs by the close of this week and will re adjust fire from there. If it runs and rides, I might just keep it. If it doesn't, it's getting parted...It'll be first come first served.
     
  32. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
  33. Gadget

    Gadget New Member

    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Glasgow SCOTLAND
    Hi how much for the clocks am in Sotland so including shiping thanks mph ok here :)
    Ian
     
  34. lllintothevoidlll

    lllintothevoidlll New Member

    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Michigan
    Actually I found out I need the speedo gear by the front wheel not the speedo itself.

    Do you still have that and what's your asking price?
     
  35. mcrwt644

    mcrwt644 Member

    Messages:
    881
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Winchester, VA
    Noone reads previous posts I guess. The bike is for sale for 1300 to any forum member. The bike is

    ON THE ROAD and WILL NOT BE PARTED OUT.

    Not to be short, but I keep getting pinged for parts and it isn't being parted.
     
  36. stryker

    stryker Member

    Messages:
    67
    Likes Received:
    0
    Trophy Points:
    6
    edit your original post....change the title....itll fix everything.
     
  37. 100dollarsteal

    100dollarsteal New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    perkasie
    is the tank still available? if so how much shipped to 18944, thanks
     
  38. 100dollarsteal

    100dollarsteal New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    perkasie
    ok nevermind then
     
  39. whitey

    whitey New Member

    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Victoria, BC
    hi there
    i will take the cross joint on the rear drive shift. let me know a price, thanks
     

Share This Page