XJ550 Seca and FZ600 parts

I have some stock XJ550 R Seca and FZ600 parts from my racebikes that might be fun for some of you guys.

Stock Seca Wheels 18” rear 19”front

Stock FZ600 front forks Steering stem shortened to fit on Seca. Complete with Brakes and clip-on bars.

Stock FZ600 wheels 18” rear and 16” front

Vision 550 wheel 18” dual disc

Stock FZ600 4-1 exhaust – Black

Seca 550 front forks including brakes and triples

Stock Seca Exhaust

Stock FZ600 dual headlight set up could be cool street fighter

Stock 30 mm carbs from FZ600- nice move up from the 28s on the 550

Complete disc brake from rear master cyl to caliper and carrier to run rear disc wheel on Seca.

Complete stock FZ600 aluminum swing arm and shock could monoshock a Seca or weld some lower shock mounts on it and run dual rear shocks.

Oil cooler with mounts and hoses.

I have most other stock FZ600 parts like gauges and switches and stuff, too.

Let me know if you want anything. I have pics I can send of specific items if interested.
PM me or e-mail at 119x119@aol.com
I have put most of this stuff on a Seca at one time or another so I can probably tell you how to do it or give some ideas.


Ken

 

how much for the whole fz600 front end with wheel?

 

are the seca shocks up for grabs and what condition are they in?

 

Depends, do you want the stock FZ600 triple, or one with the shortened stem to mount on the Seca? Do you want the 16"FZ wheel or the 18" Vision wheel? Do you want the brakes and master cylinder, switches, bars and everything?

I am figuring about $200 plus shipping for the stock FZ600 front forks, stock triples, brakes and Master Cylinder and clipons. What color wheel? I have black or red and matching rears for both colors.

Ken

 

Yes they are available. They are not rusty or leaking.

PM replied to.

Ken

 

ok sounds cool, I would like the black front wheel, cuz my bike is a shaftie so i cant just toss a rear on there, can I have pics?

and I dont have the cash now, need to sell two bike before i got some spending moolah, ill check back in with ya when this occurs

 

I'll take some pics of the black wheel and front end and post them up here.

Ken

 

Are the Seca forks black?

Which bike does the oil cooler fit and how much $ for it?

Thanks

 

XJdaver,
The Seca forks are black. Here is a picture.


The oil cooler is on a mystery parts xj550 motor that I have. It looks just like the factory FZ600 oil coolers, so I will assume that is what it is. It just bolts onto the engine under the oil filter housing with a different center fitting adapter. It is all Yamaha factory parts.

Ken

 

how much modification would that swingarm require to monoshock a seca?

 

how much for the seca exhaust? Pictures?

 

Do you still have the oil cooler, mounts and hoses?

skcloo

 

Good Parts here!!!

 

Just noticed this thread is two years old...