1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Progress with flashers

Discussion in 'XJ Technical Chat' started by JBL357, Mar 21, 2011.

  1. JBL357

    JBL357 New Member

    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    East Texas
    So re-looked over everything from fuses, relay, and to the switch and found that the solder on the switch had in fact came aloose on three wires. So re-soldered the wires and gave the turn signals a try. what i get is the left side lights up and stays lit solid no flash! and then when switched to the right side you just get a weird buzzing noise from the relay? ground maybe?
     
    JBL357, Mar 21, 2011
    #1
  2. i_am_the_koi

    i_am_the_koi Member

    Messages:
    195
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Napa, CA
    Bad relay or your making a connection to ground would be my guess.... If the relay is "buzzing"

    Check the internals of the relay. sometimes you'll melt it inside and allow it to make a connection even though your wiring is solid
     
    i_am_the_koi, Mar 21, 2011
    #2
  3. JBL357

    JBL357 New Member

    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    East Texas
    well i definately shouldnt be making a connection to ground but i guess just about everything has been possible up to this point i will double check everything...
     
    JBL357, Mar 21, 2011
    #3

Share This Page