FOR SALE Parting out my 82 750 max

Time to part it out and be done with it.... To many bikes, not enough time/money.
Long story short......
My frame cracked, I bought another one, tore down the bike, purchased some new parts from Chacal, and promptly let life get in the way. It ran fine and was a fun bike, but I need to be realistic..... The money I get will be going towards a XR100 build for my girlfriend...

Let me know what you want, I will take pics of any/all parts you request...

Updates will follow.
Located in Moab Utah 84532
cheers

 

dibs on the tank please to 74105

 

Sorry to hear about things. Good luck on the new build.

Interested in Mufflers. Can you provide pic and price?

 

Interested in Atari cluster (working speedo, cable and hub at minimum).

Does the T shaped cover over the ignition still have the rear tabs intact to help keep it in place?

What condition are the front tubes in? (outer lower alum tubes that the chrome tubes slide into at a minimum).

What condition are the controls in? (Left and right)

Does the Master cylinder cover say Yamaha on it? Overall MC condition? Any road rash?

I'll ask for everyone...
What new parts did you get / install while working on it?

 

http://s1087.photobucket.com/albums/j47 ... och/XJ750/

link to some photos....
Bill, Saber, and Bob, will follow up with more info tonight after work...

Tank is good, no dents no rust, needs paint
Have to double check my mufflers
Atari good, T cover was taken off and stored (need to find where i put it)
Front end is clean, forks blown, but new red seals in package from chacal, one of the lowers has tool marks from a ham fisted removal of calipers... need to double check and post photo Master cylinder has new window, been cleaned not put together but comes with rebuild kit in package

believe the bike tipped over and went down ..... headers a bit chewed up, several fins on the jugs are broke... other than that its in good shape.

The frame split because there was water in it that froze....Some where I have an old thread with photos..... I didn't crash the bike so very little damage, but the usual for a vehicle of its age.

 

Looked at some of your newer pictures.

Depending on your asking price, I see alot of stuff I need/want anyways. Especially the new parts from Chacal. I.E. Speedbleeder, brake pads, fork seals, VALVE COVER GASKET (mine leaks - did you buy the rubber screw bumpers?), MC + parts, etc..

I'm gonna PM you. I don't NEED everything but price depending I may want alot


P.S. If no one else NEEDS the fuse panel, I might want it for my 2nd bike in case I fix it up.

 

Are the Frame Side covers available? Price?

 

Tank, mufflers, headlight bracket, all new in box equipment are sold

MiGhost side covers are available will PM you

Who wants the carbs?
Any one want to upgrade to a 750 front end...
coils, RR, turnsignals........and anything else
more photos available
http://s1087.photobucket.com/albums/j47 ... och/XJ750/

 

Reply Sent. Covers Spoken For.

May be Interested in more. gotta check the list again.
Fenders F&R.
Triple Tree Less forks.
Turn Signals
HeadLight Assy.
Handle bar Complete w/Master Cylinder and Switch Assys.
Mirrors
Just off the top of the head

Thanx
Ghost

 

Scratch the handle bar and triple tree off my list. Wrong style for my 83.
not sure if M/C and Switch Assys will work with pullback bar.

Thanx
Ghost

 

Do you have the starter? How much?

 

I thought I mentioned it. I might want the MC (you said it was clean with new window). Think about price.

 

how much you asking for the carbs. and if you have a side stand w/ spring im def looking for one. do you still have the headlight? if so interested in that as well.

 

Kookie and Hose
PM sent

 

Desertrat, How much are you asking for the carbs and what condition do you consider them to be in? The XJ750R Seca I purchased a couple of months ago 1981, seems to have had someone that thought it was cool to use a BALLPEEN hammer on the float bowls. One of mine I find now has a crack all the way through and this is why I ask what you are asking for them and where you are at as far as how much would be involved in shipping costs? grunt007, Mi 81'Yamaha XJ750R Seca, (Larry)

 

Headlight, M/C, Coils are sold
Grunt.... Check your PMs

more photos added to the photobucket link

 

Grunt... new PM sent, Carbs are yours if you want them.

 

PM inbound.

 

I would also be interested in the carbs and or just parts out of the carbs if you wanted to part them out. Thanks

 

What do the exhaust headers looks like? I might like to get any small parts as a lot. Screws, washers, electronic bits.

 

Dirticops.. I'm currently on buyer number 2 for the carbs, I will see if he comes through with the money.

Gearnoob, I'll post header photos soon. They aren't great, but there not that bad either.

Most everything on the bike is gone.
Whats left
good seat
bad seat
headers
collector
2 sets of wheels, 1 maxim rear, 1 seca rear
brake discs
2 sets of triples
handle bars
lock set (ignition, gas cap, seat, and security chain)
engine minus starter, soon to be minus intake boots (willing to break open, 12000 on clock)
2 center stands
final drive with boot
Forks (blown seals)
battery box
grab bar
foot pegs (includes passenger and shift?brake levers)
and plenty of head light juice

 

desertrat - Got the mufflers today, they look just like you described. I already cleaned them up and removed the old pipe and gasket. Can't wait to install them!

 

Desertrat - Got my box of parts today. Very well packaged! MC looked nearly new. Headlight bucket looks great.

What condition are the front rotors in? Can you measure thickness? *DIBS based on price/condition*

I forget if I asked, do you have the front caliper assemblies? Pictures?

Are the forks still attached to tubes? That would definately be cheaper than shipping the whole assembly... But full assembly would let me rebuild & upgrade OFF the bike.

Price and if my new temp-to-perm job works out next week (and beyond) will determine how bad I want the misc parts.

 

Got my parts. Everything looks good.
You have my list for round 2.

Ghost

 

I really need the front and rear rim spacers if pos that would be really cool. My email is vip20972@yahoo.com

 

Hey desertrat, do u have a exhaust collector left? I'm missing the chrome piece that's welded onto it on the right side , so u just see the galvanized part of the Collector when looking at it . I would like to weld one back on so my exhaust looks like one long chrome piece from the header to the muffler . If u have one just hit me back. Thanks for ur time !

 

Do you still have the lock/ignition set available?

 

Massiom. I will save you the hassale of waiting for an answer.

I bought the lockset from him a while back.

Ghost

 

Thanks for the heads up Ghost, i appreciate it.

Massimo

 

Well folks, I've had an interesting summer to say the least. I'm back and want to make one more final push to unload all of my XJ parts. Its kind of hard looking at the remains... I also need the space and money for more projects. Look for an upcoming list of parts and PMs to several of you that have posted recently.

Cheers