1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

relocating rear fender?

Discussion in 'XJ Modifications' started by prince_albert3, Nov 15, 2011.

  1. prince_albert3

    prince_albert3 Member

    Messages:
    436
    Likes Received:
    2
    Trophy Points:
    18
    Location:
    Rochester, PA
    I've been brainstorming over some possible winter projects. I'm thinking about relocating the rear fender.

    What I had in mind was using a skinnier fender, something close to tire width. I want to get the fender to hug the tire closer so I was thinking about mounting a couple tabs on the swing arm. Then, in theory, I could bolt the fender to the swing arm and use a couple support braces in the rear.

    Of course, this is nothing major. I was just wondering if anyone around here has done it or maybe someone could direct me towards some pics?
     
    prince_albert3, Nov 15, 2011
    #1
  2. prince_albert3

    prince_albert3 Member

    Messages:
    436
    Likes Received:
    2
    Trophy Points:
    18
    Location:
    Rochester, PA
    no one?
     
    prince_albert3, Nov 16, 2011
    #2
  3. wrxg33k

    wrxg33k Member

    Messages:
    101
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    York, PA
    I removed just the rear half of the fender and relocated the taillight and license plate so it's tucked up under the seat on my xj650rj. works well
     
    wrxg33k, Nov 16, 2011
    #3
  4. taildragger

    taildragger Member

    Messages:
    192
    Likes Received:
    0
    Trophy Points:
    16
    Was thinking how I used a Radian rear fender to update the look on my XS.
    Best part is it also fits an XJ550 Maxim - bolts right on. Should fit the larger XJ bikes too.

    Yamaha oem frame rails for most XJ & XS models are 7" inside edge to edge.
    Usually requires only 1 or 2 washers to get the Radian part tight.

    Have the fender left from my first XJ project ...

    [​IMG]
     
    taildragger, Dec 13, 2011
    #4

Share This Page