1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

flasher talk

Discussion in 'XJ Technical Chat' started by hash, Jul 6, 2012.

  1. hash

    hash Member

    Messages:
    61
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    quebec
    hey guys for some reason my flashers wont flash they just stay lit or they will flash once or twice then stay lit i have to flash them myself any idea on what to look for? :?
     
  2. dmccoach

    dmccoach Member

    Messages:
    460
    Likes Received:
    5
    Trophy Points:
    18
    Location:
    NE PA
    OK, quick question: is it an A.M flasher relay? http://xjbikes.com/Forums/viewtopic/t=38426.html

    Also, along the same lines, if it is an OEM unit, it can "trap" water and if it has water resting in the bottom of the case, it will function intermittently or stay on or "hang" on, etc.

    The OEM unit can be opened up for inspection.
     
  3. bigfitz52

    bigfitz52 Well-Known Member Premium Member

    Messages:
    21,283
    Likes Received:
    418
    Trophy Points:
    83
    Location:
    Rural SE Michigan 60 miles N of Motown
    Is the system all OE, or have you just swapped signals, or ???
     
  4. hash

    hash Member

    Messages:
    61
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    quebec
    no im going to swap the signals but i want them to flash first ill look into what dmc said
     
  5. readlee

    readlee New Member

    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Twickenham
    I had the same issue, the 2 pin and stock flashers are not great.. FYI I managed to fit a CF13 3 pin to my xj750. Brown is + and connects to B+ pin, the Brown/White is your BULB side which connects to L pin. Lastly, you need to connect E- to the frame or and earth wire. You can leave the Yellow/Green wire, which is your auto off trigger.
     

Share This Page