headlight mod / help needed 83 seca 750

I have a 1983 750 se a I'm doing a mod on and I am wanting to change from a double factory set up to a single 7 inch with halo ring light Hb4 60/ 55 to be exact. My question is how to hook up the high and low beams. The factory uses a two light setup and it will now be a single unit. How do I do the wiring to make it work for a single???

 

You double posted but any way the seca 750 has a high and low beam on the top head light . The bottom light is just a aux light or extra light fog light .Some of them came with a yellow lens on bottom light . You can use high /low plug from top light and simply tuck plugs from second light away inside new head light .

 

The aux light wires will do a fine, and convenient, job of powering the halo ring.

 

ya you can just toss the aux light if you want then swap out the healight unit for your fancy halo one, wire the projector light up to the factory headlight circuit then like elk and k-moe said you can just run the aux wiring into the halo ring, you can also bypass the aux switch/ wiring and just run constant power when the key is on.

its all up to how creative you want to be.

 

Sounds like the PO did a little wire mod added the aux light with out the aux switch

 

Do you have an aux switch?

 

oh and don't just toss the aux light elk haven seca is a parts hoarder and would love to have it

 

good lord man have you no shame

 

I have no shame when it comes to unloved tossed spare parts . I will find them a home !!

 

For every unloved part there is someone who would love to give them a home

 

Thanks for all the help. Great advise y all very helpful