any microsquirt guys out there?!!

ok stop before you put that junk ford crap on your bike im running the same setup 420a coil with microsquirt all you need is to order the quad spark from diyautotune

 

Any hints as to why the ford is junk? (as per my last post I've found EDIS to be a very good system)

 

THANKS FOR THE TIP!!! I almost bought one last night.

On this setup, do you have to set the trigger wheel angle exactly? The Ford EDIS must be 90° ahead of the VR sensor when at TDC. Or, can you cout the teeth and set a trigger offset in tunerstudio? I have somewhat already welded the trigger wheel in place, but can be changed. What is your setup? Everything else is set to go on the bike except for this.

 

This site has a lot of information on Mega/Micro Squirt stuff.

http://www.roadstercycle.com/yamaha_vma ... cv_car.htm

 

I still say there's nothing wrong with EDIS, great system IMO with loads of power & cheap to buy. I'm still waiting for him to explain exactly why it's "junk crap"...

 

I talked to the guys over diyautotune any decided to purchase the quadspark model. I don't have to rewire as much & I can set the timming by software vs having to set the timming exact on the trigger for edis. They also told me that the edis is not a good choice for engines revving higher than 6,000 rpm. I don't know if this is true? But, I'll take the man's word. I hope to get it by Friday so I'll have the weekend to get this beast finnally started!

 

Being able to set the timing via software is a good advantage I'll give 'em that much! Not sure why it wouldn't be good above 6k but anyway, sounds like you found an easier solution timing & wiring-wise so all's good. Hope the fire-up goes well for you

 

Thanks! I'll have a video of the fire up when it happens.