1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ 700 will only run WOT

Discussion in 'XJ Technical Chat' started by meich75, May 1, 2013.

  1. meich75

    meich75 New Member

    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    NC
    One of my bikes will run but only with the throttle wide open. As soon as you let of the gas it dies. I was thinking of just rebuilding the carbs but was wondering if there was an easier fix. Maybe the float levels are set wrong?

    The carbs were supposedly rebuilt just before I bought the bike but something was apparently done wrong.
     
  2. MercuryMan

    MercuryMan Active Member

    Messages:
    1,154
    Likes Received:
    1
    Trophy Points:
    38
    Location:
    Springdale, NWA
    That about says it all.

    >90% of the reason people join this site is your very situation. No quick or easy fix for it-Search "church of clean" here, and read any of the most read carb articles on the site. It's due for carb job for sure-cleaned, wet-set levels, synched, basically the whole-9.
     
  3. meich75

    meich75 New Member

    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    NC
    Thats what I thought but it never hurts to ask. I got 2 bikes with 3 sets of carbs. Rebuilding and cleaning the other 2 sets and thought the previously "rebuilt" ones would make good spares. I read church of clean at least 3 times before opening the carbs.
     
  4. jmilliken

    jmilliken Well-Known Member

    Messages:
    1,572
    Likes Received:
    46
    Trophy Points:
    48
    Location:
    Dillsburg, PA
    While you are cleaning take the time to split the rack + do your pilot adjuster o rings, fuel rail o rings, and throttle shaft seals. that way you only do it once.....
     

Share This Page