83 750 seca mastercylinder relocate

Great help on headlight mod thanks! I got this damn remote master cylinder in my way for my new headlight brackets I need to relocate to a handlebar mounted set up. How do I remove and run the new lines???

 

its mounted to the headlight bracket itself, just pull it off and pull the lines

below the master there is a T for the lines you can keep and buy lines to work with it or run 2 lines straight from the new master to the calipers.

Pick the master you want i choose one off an fj1200 and i bought stainless lines from z1 enterprises to go direct from the master to each caliper.

I also had to grind off the original brake perch to fit the new one on, check my build thread for pics of that.

I hope this helps if you need more detail let me know.

 

I ran a katana master cylinder on the new handlebars and had new steel braided ones done.

 

Mine is off Mike's XS website. Be careful to pick correct inclination so that the fluid stays stable in the MC.
The lines are Goodridge SS, one from MC to right caliper, then on from there to left caliper.

 

Great advice y all that really helps thanks... also would like to add that was a shitty engineering design !

 

It was style over function! :roll: