How To: Home Made Carb Sync Tool

Go get yourself:

3 pack Glass Baby Bottles from Wal-Mart $%
ATF+4 Transmission Fluid $4
2 Rubber Stopers. I Used #7 at Lowes. A little too big. Had to trim off some of the edges $4
8 ft Fuel Line $9

Youll need:
A Drill
Drill Bits
Razor Blade
Rubber Gloves




Drill into the rubber stopper twice.
I cut one piece, 2ft long, and then 2 pieces 3ft long. the 2ft goes from bottle to bottle
the 3fts will run from bottle, to the intake nipples
Insert fuel line into the holes. Lube withOne just needs to breach the bottom of the stopper. The other needs to be long enough to reach the bottom of the baby bottle Make sure you slide on the baby bottle caps before you insert the fuel line





Fill the baby bottle 1/4 way with ATF+4. Press Rubber Stopper down into the bottle, screwing the top on. The stopper will want to push put. Thats ok, means a tight seal
Repeat with 2nd bottle







I hung the bottles by a tiny bungee I had, off the handlebars.
No tipping or falling over, was pretty safe on the handlebars





Heres the How To Sync!


http://www.youtube.com/watch?feature=pl ... J1vWiHWW7s

Any questions be sure to contact
-Chris

 

Love the saddle....boxes

 

when you do 1-2 you change 2-3 relationship, that's why you have to change 2-3 at the end. the order should be 1-2 , 3-4, 2-3

 

Huh. I've always just started in the middle and double checked my work. As long as you feel confident when it's done is all that matters!

 

There is only one way, you line up 1&2 then 3&4 then 2&3.

 

You heard em boys and girls!

 

I was once very confident that if I jumped off of the roof I would fly.

 

But now you are older and wiser and have forums to advise against doing such things

 

nice cheap and cheerfull tip well done bud