1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Headlamp Issue

Discussion in 'XJ Technical Chat' started by 12Rant, Aug 27, 2014.

  1. 12Rant

    12Rant New Member

    Messages:
    28
    Likes Received:
    1
    Trophy Points:
    3
    Location:
    Nortern Ontario
    Hi everyone. I have a 1982 Seca XJ 650RJ and I just got the bike this month and just got it running yesterday.The issue is that when I turn the ignition on the headlamp turns on and both Lo/High beams work, but,t when the engine runs the headlamp turns off. Is this a relay issue and if so where is it located. In my manual it shows attached to the frame under the gas tank. There are 4 relays showing in this vicinity. Could any tell me (going front to back) what these 4 relays are, or specifically which one is the headlamp relay.
    Thanks in advance.
     
  2. chacal

    chacal Moderator Moderator Supporting Vendor Premium Member

    Messages:
    9,162
    Likes Received:
    1,973
    Trophy Points:
    113
    Location:
    The room where it happened
  3. 12Rant

    12Rant New Member

    Messages:
    28
    Likes Received:
    1
    Trophy Points:
    3
    Location:
    Nortern Ontario
    Thank you Chacal. You've saved me a lot of time.I found your thread on relays. I had number of starting issues and wiring issues. I just got the bike after it being stored for 9 years. I guess the PO had done some work on the wiring and had the headlamp relay and side stand relay reversed and I guess that's why the headlamp when on when I turned key and shut off when it ran.
    Runs great, thanks again.
     

Share This Page