For Sale XJ 650 Parts

Hey folks... got a list of parts to sell...

1982 XJ650 engine. Most parts are there. Few missing studs on head + shims and buckets missing.
- Will sell parts of engine or whole.

All parts are from a xj650 of some year.

2 - Battery boxs
1 - Air box lid
1 - 1982 harness
1 - seat pan plastic
1 - 1982 set front turn signals
1 - 1982 shaft drive .. very nice looking condition
2 - rear wheels --- tire tread may be ok, but tires old.
1 - front wheel --- tire tread may be ok
1 - set of rear shocks
1 - airbox
1 - 1982 coils
1 - set of front forks nice condition
2 - front fenders
2 - rear fender
1 - rear tail light
1 - center stand mechanism
1 - side stand
1 - rear brake system ( shoes, side cover, spring and so forth )
1 - 1982 frame, little / no rust, good for chopping or rebuilding, clean title

Possibly other pieces just ask.

Buyer pays shipping.

 

carb boots? If so, what year?

 

Totally forgot about those. 1982 boots.

All 4 are good, 1 has some rtv around it.
No cracks.

 

maybe a better question rather than the year is what engine they come from. Non-YICS or YICS? orientation is the big factor as they aren't suppose to be transferable.

 

80-81= non-YICS, 82-83=YICS

 

You need
A single non-YICS, for cyl 1-4 or YICS for cyl 3-4, to replace yours. You have a a single YICS 1-2 mismatched boot.

I just notice the pic never went, so I just resent to your phone. You'll see YICS 1-2 are opposite to 3-4. NON -YICS are all the same , and also the same as YICS 3-4

 

got it Dave, thanks again!

YICS go \ \ / / and non-YICS go \ \ \ \

My number 1 will be rotated 180 degrees and swapped to number 3 so the nipple is straight up and angles out from the boot to the engine head correctly. Currently as Dave said I have a mismatched boot on number 3 that actually came off a YICS bike.

So I need another number 1 boot. My bike is a non-YICS

I hope this is accurate for everyone! And sorry to hijack the thread Gulrok; carb boot orientation is important FYI!

 

I'm sorry I'm not trying to jack your thread but there are intake boots for non YICS and YICS bikes?
how do I know if I have the right ones?

 

Aaron, correction for you:

YICS=//\\ Not \\//

Non- YICS \\\\

Here's a YICS SET:


You just have to pay attention to the orientation of the ears for the bolts, in relation to the vacuum port. Also, you must pay attention to the angle of the rubber opening from the carburetors to the manifold.
Boot number three and four are the same for both YICS and non-yics bikes. Boot number one and two are different for YICS .

 

These are the boots.

 

YICS set... Moellear, these will not work for what you need unless you're content to STILL have some facing the wrong directions

 

Parts still available.

 

PM sent

 

Prices on:


Battery boxes


Air box


Coils


Side stand


Ehhhh, also the brake stuff and the rear fender


Thank you!

 

How much for an intake valve?

 

An intake valve? I pulled on out today to try out my valve spring compressor.

Will send PM.

 

PMs sent to everyone so far.

 

I have a bunch of 650 valves and springs as well.

 

Still got that plastic seat pan?
If so how much?

 

headlight assembly? pictures and price?

 

Bulb / headlight included as well or not?

 

looking for the headlight bucket, headlight itself and yes the bulb too. is it a sealed-beam head light or is the bulb replaceable?

 

I have the bucket, not the bulb..

 

sorry, just to let you know i did get your PM, life has gotten in the way of me figuring out an exact game plan. Not procrastinating.

 

Looking for a set of forks in really good cosmetic condition - I'll redo the seals. Can you let me know what shape these are in (i.e., rust, pitting, scratches, etc) and send me some pictures?
Thx!

 

Sure I'll get you some pictures. In your inbox.

 

3badbirds, where are you located?

dave in NY

 

Response sent.... thx