1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Clutch -I've searched the forums

Discussion in 'XJ Technical Chat' started by singlewm35, Jul 21, 2007.

  1. singlewm35

    singlewm35 New Member

    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Carrollton, GA
    Unable to find a post that matches the descriptions of my problems. But then I'm new to bikes so.... well that's probably my 1st problem, lol.

    Any whays, my clutch engages with only a small effort put on the handle.
    I have only a little bit of free play. (Still some room for adj. though I suspect, but not mutch)
    It is rough going into any gear, Sometimes it doesn't make 2nd or jumps out when it gets there.

    In nuetral the bike is very easy to roll and get parked/turned, but if I leave it in gear and pull all the way in on the clutch there is a big difference in the ease at which the bike roles. Its a lot harder when in gear with clutch pulled in.

    There is some jerking changing gears but nothing serious. I just tell her to hold on tight :wink:

    Maybe I'm not getting the whole picture, but seems to me if clutch disengages with little effort, the rolling around in the garage should be the same with the clutch/in gear or in nuetral.

    Also, other than whearing out the clutch what problems do lack of fore, I mean free-play cause?
     
  2. KiwiXJ750D

    KiwiXJ750D Member

    Messages:
    587
    Likes Received:
    4
    Trophy Points:
    18
    Location:
    New Zealand
    2nd gear problem

    Search the forum using "clutch adjustment" and Author "RickCoMatic" for detailed clutch help.

    Oil and filter change?

    Try upshifting 2-3-4-5 without clutch. Blip throttle closed and flick the gear leaver up. Still rough?
     
  3. RickCoMatic

    RickCoMatic Well-Known Member

    Messages:
    13,842
    Likes Received:
    68
    Trophy Points:
    48
    Location:
    Massachusetts, Billerica
    Look at your Clutch Lever.
    Just past the "Hinge" on the lever is an Adjustment Feature.

    There's a Locking wheel that looks like a Half-dollar with a Bolt running through the middle.

    That's called the "Knurl Adjuster"

    Loosen the Big, Round "Half-dollar lookin'-like wheel all the way to the right.
    Turn the "Adjusting Bolt" part OUT as far as it will come.
    Oil it.
    Turn it IN and OUT to spread the oil on the threads inside the handle perch.

    Now ...
    Make an adjustment.
    Check the Clutch Lever for how much play there is before it starts getting difficult to pull.
    Adjust the Bolt so that there's no wiggling before it gets tight.

    When you have adjusted the SLACK out of the Cable ...
    Tighten the Big, Round, Locking wheel all the way to the Left.

    How that work for you???
     

Share This Page