fj600, ground wires?

Alright so ive made 2 grounds for the bike. Fir those of you who haven't heard me complain I've had this bike 3 years. Picked it up practically a frame and a bad engine.

Skip forward to now, may run in another week or so. So the turn signal switch has a ground wire that has no connection. Should the ground go to the twin bullet ground on the front and then a separate ground go to the headlight. I have 3 bare wires i was about to put a headlight connector on but now I'm not clear how this works.

I've got it to crank, shock me, and got the gauges illuminated. I'll throw pics up later

 

Well to answer the question if anybody ever comes across this is yes, the ground from the switch goes to the bullet connector. Then yellow goes to the squared 4 pin connector to illuminate the high beam light.

My signals also lit up but the relay module made a buzzing sound and after a few mins i turned the key on and no neutral light or signal lights. Wondering if the relay or flasher module as its called is crapping out.