xj 600 s uk bike electrical questions (help)

just a quick couple of questions i hope someone can help me . check the pictures out the one with 3 wires is for the indicators can you tell me where they go in the flasher can as the previous owner has cut them off and the other picture s two spare wires and i think they are for the carb heater but dont match up to the wires on the carbs so i thin there is somthing missing all help would be apresiated ,

see the buld in the hang out lounge ( what have i bought )

 

Br/w would go to pin marked load. Br is hot wire

 

still no confused ,

andy

 

He didn't include enough to see what 28 is. I'd guess it's a three wire flasher module. If so, a generic three wire flasher module should work, with supply on brown, ground on black, and load on brown/white.

 

Black/white is the safety circuit ignition disable to prevent you from cartwheeling your bike by accidentally driving off with the sidestand down. It connects to the TCI.

 

28 is the flasher relay

 

indicators now sorted generic flasher can and wired up worked first time now just the front lights to sort having major problems with this difficult to explain but turn the side light on all is ok turn the headlight on side light goes out and no headlight , press the high beam flash and side light goes out , on my xj 550 the engine needs to be running for the headlight to work so i asume this is the same but engine wont run for a month awaiting parts any help will be apresiated as the wiring diagram i have is poor to say the least , so if anyone has a good diagram please can i have a copy (xj 600 diversion 4br uk model 1995 ).


andy

 

This any good? > https://www.xjrider.com/viewtopic.php?t=5007
Although it's for a US model on the top left it states that the lighting switch is for a UK model.

 

Can anyone tell if there is a black box that can be used as a substitute for the one on the xj550?