1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Oil level concern

Discussion in 'XJ Technical Chat' started by Mxtlplck, Sep 26, 2022.

  1. Mxtlplck

    Mxtlplck New Member

    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Kansas
    Hello again. She runs!! Cleaned the carbs good, checked seals, cleaned air filter, changed petcock, fired up immediately. Idles no problem, sounds good.

    I changed the oil, 10w-40, filled to the top of the sight glass. Filled the filter before installing. No leaks after 2 weeks. Before starting for the first time, I noticed the oil dropped to about the middle of the glass. I topped it off, and it went back up. Fired up, ran about 8 minutes, rejoiced because my clumsy ass actually made something work, and then I noticed the oil was back to the middle of the glass. I’m really hoping this is normal. Not leaking anywhere I can see, I looked hard. Carbs didn’t have oil residue and exhaust smoke isn’t white/blue/black etc. Am I going crazy, or is this abnormal? TIA
     

    Attached Files:

  2. Franz

    Franz Well-Known Member

    Messages:
    4,425
    Likes Received:
    1,249
    Trophy Points:
    113
    Location:
    Scotland UK.
    Oil heads for the bottom of the oil pan and is pumped around the engine when running. So when engine is off the level goes up a little.
     
    k-moe likes this.
  3. Jetfixer

    Jetfixer Well-Known Member

    Messages:
    3,191
    Likes Received:
    1,503
    Trophy Points:
    113
    Location:
    Nothern Indiana
    Take a deep breath your oil level should have a slight bubble at top of sight gauge , you don't want to over fill oil .
     
    k-moe, Franz and Mxtlplck like this.

Share This Page