1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

New turnsignals Both Flash

Discussion in 'XJ Modifications' started by philbrewer, May 10, 2008.

  1. philbrewer

    philbrewer Member

    Messages:
    176
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Livonia, MI
    Ok guys I have another problem with my flashers. I installed new front signals that were smaller than originals. Before this I installed a new electronic flasher relay and my rears work great. The problem is my new front flashers both flash at the same time when I hit either side. My rears flash properly, but no matter which side I hit both fronts flash, any ideas?
     
  2. ZaGhost

    ZaGhost Member

    Messages:
    961
    Likes Received:
    2
    Trophy Points:
    18
    Location:
    Dartmouth, Nova Scotia
    Check you wiring.... and /or your switch
     
  3. Gamuru

    Gamuru Guest

    Messages:
    1,275
    Likes Received:
    17
    Trophy Points:
    38
    Location:
    Granite Falls, WA
    Yep, sounds like wiring. Like you've got a bad ground and it's back-feeding through the other light. You may have to check the light's internal wiring to see if it's that same as the old lights.
     
  4. philbrewer

    philbrewer Member

    Messages:
    176
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Livonia, MI
    the originals worked fine. all i did was swap to the new ones. how can i tell if the internal wiring is the same. these new lights groud to the frame same as the old. nothing can be simple can it.
     

Share This Page