swingarm bearings

hi all im looking for swing arm bearings for a xj1100 maxim.anyone got them or know where they can be got.what other bike would have the same bearings.thanks

 

Check with Chacal. If he doesn't have them he'll know where to find them.

 

All the bearings on Yamaha Machines are Standard. Easily procured from Bearing Supply Firms.

The size of the Bearing you need is engraved on the Bearing.
Call a Bearing Supply Store and tell them what size you need and you get the right Bearings at a reduced price for dealing with the wholesaler.

If you need Logos, Plastic Bags and Bar Codes with them ... expect to pay dearly for the additional cost of removing them from the boxes they arrive in and repackaging them for retail.

 

Here they are!:





XJ650, XJ700, XJ750, XJ900RK, and XJ1100 models:

Unlike the XJ550 models, XJ650 through XJ1100 models use dual short pivot Shafts, associated Lockwashers and Nuts, a spacer Collar, an Oil Seal, and a Bearing on each side of the swingarm. A round black or shiny chrome end cap or Cover hides the inner workings from public view. Here are the pieces you'll need, working your way from the outside inwards:


HCP1521 OEM swingarm decorative FRAME CAP - COVER. Bright polished chrome discs snap into the hole in the frame. Use on both sides on all XJ650, XJ700, XJ750, XJ900RK and XJ1100 models. NOTE: XJ650 Midnight Maxim and XJ750 Midnight Maxim models used this same cover, but painted gold, while 1982-83 XJ750 Seca models and XJ900RK models used a black version of this cap. Each:
$ 14.00

HCP1523 OEM swingarm decorative FRAME CAP - COVER. Gloss black painted discs snap into the hole in the frame. Fits on both sides on all XJ650, XJ700, XJ750, XJ900RK and XJ1100 models. NOTE: these black covers are only correct for 1982-83 XJ750 Seca models and XJ900RK models. Each:
$ 14.00



HCP3974 OEM swingarm pivot stud NUT.. Use 1 on the right side pivot stud on all XJ650, XJ700, XJ750, and XJ900RK and use 2 (both left and right sides) on all XJ1100 models. Each:
$ 8.00

HCP2245 OEM swingarm left side PIVOT SHAFT - BOLT.. Fits all XJ650, XJ700, XJ750, and XJ900RK. Use 1 per bike.
$ 11.00

HCP2248 OEM swingarm PIVOT SHAFT - STUD.. Use 1 on the right side of all XJ650, XJ700, XJ750, and XJ900RK and use 2 (both left and right sides) on all XJ1100 models. Each:
$ 14.00

HCP2225 OEM swingarm left side pivot shaft bolt LOCK WASHER.. Fits all XJ650, XJ700, XJ750, and XJ900RK. Use 1 per bike.
$ 4.50

HCP2228 OEM swingarm pivot shaft stud or bolt SPACER COLLAR.. Fits all XJ650, XJ700, XJ750, XJ900RK, and XJ1100 models. Use 2 per bike. Each:
$ 6.00

HCP2227 OEM swingarm pivot shaft stud or bolt OIL SEAL.. Fits all XJ650, XJ700, XJ750, XJ900RK, and XJ1100 models. Use 2 per bike. Each:
$ 6.00


HCP2226 OEM swingarm pivot shaft stud or bolt ROLLER BEARING.. Fits all XJ650, XJ700, XJ750, XJ900RK, and XJ1100 models. Use 2 per bike. Each:
$ 18.00

HCP2226SET2 OEM swingarm pivot shaft stud or bolt ROLLER BEARINGS., set of 2:
$ 34.00



HCP1691 Aftermarket swingarm pivot shaft stud or bolt ROLLER BEARING.. Fits all XJ650, XJ700, XJ750, XJ900RK, and XJ1100 models. Set of 2:
$ 29.00



HCP8608 Aftermarket gear and bearing synthetic RED MOLY GREASE.. High temperature, water resistant, extreme pressure and high-load strength synthetic organic moly grease is far superior to black moly disulfide (petroleum-based) products. Use on steering neck bearings, wheel bearings, starter motor gears, and swingarm bearings. 14 oz. tube.
$ 13.95

 

thanks alot,will check that out.