1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

electrical question

Discussion in 'XJ Technical Chat' started by gabrar, Jun 19, 2006.

  1. gabrar

    gabrar New Member

    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Rantoul, IL
    Again, an 81' XJ650 Maxim

    After pulling the carbs off and replacing them, I've introduced an electrical problem with multiple symptoms:
    - Turn signal indicator isn't working and I think the flashers aren't either (need to check, but on work travel).
    - The neutral light comes on when the kickstand is down, but not when the bike is in neutral.
    - The tach isn't running.

    I have to believe I screwed one thing up that hit all three things. Any ideas on where to start looking?
     
    gabrar, Jun 19, 2006
    #1
  2. Kryoclasm

    Kryoclasm Member

    Messages:
    53
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Albuquerque, NM
    I'd be looking for a un-wanted ground. Typically grounded wired either short out a lot of things or cause a lot of operation symtoms.
     
    Kryoclasm, Jun 19, 2006
    #2
  3. Robert

    Robert Active Member

    Messages:
    7,479
    Likes Received:
    9
    Trophy Points:
    38
    Location:
    Ventura CA
    You have the main wire bundle secured to the frame (spine) of your machine just above the carb bank. It is possible you chaffed a few wires wrestling with the carbs. I'd be looking up there. Additionally, you may have unplugged one of the connectors of any of the above mentioned circuits. Happy hunting.
     
    Robert, Jun 19, 2006
    #3

Share This Page