Thanks for the help everyone. It's all fixed running well adjusted float a little bit and changed out pilot jet that looked concerning it was one...
And also does the pilot jets have two different sizes with same size number stamped ??
It's not overflowing now on prime as I fixed the float needle. Still not getting enough air.
Carb 4 every time. I'm confused because that carb is set up the exact same as the other 3. I can turn the idle mixture screw all the way In. Small...
They all drop evenly at a slow pace
Took off carb checked floats and needles. Still doing same thing. Unless I take this cap off the intake boot it runs better. Makes no sence
Just found out the if I take the little sync plug cap off of intake boot almost instantly comes out of its issue.
Yes wet set is on par. And I did reuse them, the rack was a full rebuild I did few years ago.
Checked float seems fine. Never checked needle but never touched it also.
Yep did the same, also tried multiple TCI's
So tore down more carbs after they been sitting around for ever. Did a through cleaning. I Put new dyna coils on new wires, because I though the...
T That I do not have.
Yes and yes
Ordered new dyna coils anyway. Even if it's not the issue it'll be a nice upgrade.
I have a ton of X parts if anyone's looking. Just let me know what ya want, I'll tell you if I have it. I will sell cheaper then eBay. Located,...
I found two x bikes for parts the engines were complete. 500 Canadian for both.
I have plugged multiple TCI in same thing
Just checked coils. Readings on primary are 3ohm secondary is getting nothing. So I guess I'll be ordering some dyna coils. Is there any link...
So I came across a lower km engine as mine was running poor psi, so I swapped it out. Long story short, I had to swap that engine with another. My...
Can someone put me to the chat about how to install the max X carbs. I forget haha
Hey guys. So I picked up a parts bike 85 max X, got it running did valves motor sounds great starts good and what not. But the compression is 120...
Will a 85 x motor hook up to 86 x wiring.
I bought a 2001 gsx750f the clutch slips at high rpm. Still pulls pretty good down low. The oil has been changed, with correct oil. As soon as i...
Thanks
Does anyone know if a 700x head is the same as a 750x head. ?
Curious if the valve springs are the same for intake and exhust. Got valves out. Lot of carbon built up so giving them a good clean .
Guage is fine. Leak down test next then.
Thanks guys i do aprecaite. The rattle sounds like its one of the sleevs in the header .I thought mine had them. Put wood on motor and to my ear....
Ill get to that next. Bike is an hour away now at my fathers.. Just out of curiosity . Would a burnt valve make a rattle. It does seem to have the...
Broken valve maybe?
Rattle happens on take off and when you let off. Sounds like metal hitting metal . Did it more when it was cold less when warm. Collars are tight...
Sound like alot of work to me. Anyway dont seem like theres any help here. Well done .
Not the plugs .
Talking about my 86 .But why merge threds when this is a hole new topic. My bike was great all year .Now has power loss sounds like a vtwin .And...
My last post has nothing to do with this thred .
Oil was changed regularly . Had the bike 2 years .My father had it before me. I just cant tell where the noice is coming from. Only hear it when...
86 maxim X Well. Took the last ride yesterday. 40 minutes on hwy. Got off the hwy, bike sounded funny. So i continued to gas station. Bike still...
Even if it sounds like a sewing machine when im doing 100kmph lol
Valves are in spec. Everything else looks like it has good wear ...bike works awesome just the tick is annoying .Bike dont tick untill it gets to...
Cam chain tensioner
When your having a bad day already. You should leave your bike alone .[ATTACH]
Has a person ever took a shim down in size at a machine shope.. I need a 165 and the lowest I got is a 178. Can the machinist bring it down to a 165?
Just messuered. And one intake and one exhaust valve are little loose on same cylinder. Id say thats where my tap is.
I dont mind now that ive done it enough. Maybe 3 hours. But least I got it down now haha
1986 maximX Hey guys .Since I did my valves and carbs .This year my bike on the left side seems to be a bit louder then the right .Small tick but...
Hey everyone .I sartes a motorcyle group on face book. I know there's lots out there. But trying to build a good group for everyone who loves...
Is their any xs forums .Buddy and I are rebuilding one and wondering whats out there for groups?
Works normal.
So with all thats done to my bike. It still starts hard when its warm after sitting for 5 minutes or longer . Everything is to spec. I even tried...
Ok thats What I thought .but I was alittle scared haha .Thanks guys .