[ATTACH] [ATTACH] Well there she is, all my winter Reno’s done new light, speedo, rear shocks, sissy bar/ bags, and couple other small things,...
Thanx
So I’m mounting my new speedometer on the bike and have discovered that my cable is like 6” to short now, is there an extension I can buy? Certain...
I’m pretty excited for this year, I think I got the bulk of the issues dealt with last year, just been doing cosmetic stuff over the winter, I’m...
Ok I’ll try and squirt some grease in there, the ears on the wheel were bend found that out last year when I changed my tire, I did bend them back...
Awesome thanks dude, it’s a brand new cable and I’m pretty darn sure The piece that drives it on the wheel was installed on the wheel correct, but...
Hate to be naggy but any thoughts?
So I’m doing some bike Reno’s this winter, my speedo cable is disconnected right now and I noticed when I spin the front wheel forwards the cable...
Ok thanx
O ok so if I get a tach that's a 4 cylinder one and electrical I should be fine then eh? Just connect the wires
Cool thanx
So I'd like to get rid of the original gauge cluster, 82 maxim 750, I'm looking at this it says it takes a 12mm cable, so is this a fairly simple...
We'll see tomorrow what hoops I'll have to jump through to get registered. Maybe it won't be to bad
I did decide not to go single carb but this whole project I think is down the toilet now, bill of sale problem, gonna find out Monday when I phone...
So these shocks are on my 83 magna parts bike, i like the look of spring shocks and I wanna replace the air ones on the goldwing, is it safe or ok...
Test run went pretty well, bikes running good now just in time for winter, now it's time to get started on my goldwing
Well I think I got it, go for a test run tomorrow after work, they still feel loose but this is my first bike so I don't really have anything to...
Ok thanx, I opened my brake and bleeders like in the directions and my mc drained in about 5 mins so I closed the bleeder and I'm sanding my lines...
So when all bleed, where should the brake fluid level be at? Between the lower line and top of glass? Want to avoid this hydro lock you speak of
Thanx I'll try that tonight, that sanders a good idea
I've got a 82 maxim 750, when the system is closed it will gain a little bit of pressure but not much, and I did make sure the holes were clear at...
So I'm trying to bleed my front brakes I used a vacuum pump on each caliper about 37 times lever still isn't firm so I'm gonna do the old manual...
Interesting ok thanx, maybe that's just how it is
Yup I did those about 2 months ago
So bikes been running awesome but 1 thing I noticed and I've read though some threads but didn't find my answer is hard hot start, cold start...
New rings are on the way, cutting it close my road test is on the 29th and they said my parts will be by the 20-22 hahah in the mean time I'll...
Which one of the small holes at the bottom is the one that release the pressure from the calipers?
Just curious, my brakes weren't leaking at all and I didn't wreck the o rings when I took them out, if I just clean all the crude out of the hole...
O ok, I did replace the diagram in the cylinder and clean it out, I looked at my brake line but can't make out any of the numbers there all faded...
My front brakes won't open got a few mins down the highway and smelt burning my rotors were so hot coulda fry a egg on em, gonna take the pistons...
Ahh that makes sense I thought new question new thread,
All my spark plugs looks like this, my adjustment screws are all 3 turns out, is this a sign of to much fuel? It only made that one poof of black...
Went for a drive today, in town was fine went and picked up my buddy drove over to the highway, once I got on the highway it felt like I lose all...
I wanna get new mirrors what size thread is it? 82 750 maxim
Haha thanx dude, I'm glad I don't have to read through 47 "get your girlfriend to show you" responses to get a real answer, like you said better...
I really didn't wanna ask this but Google didn't tell me, how full do I fill the cylinder? To the lower line or right full,
I was pretty sure there was no fluid but thought I'd check, thanx
Yup it is 750
Dos the rear drum brake take brake fluid or just calipers
O ok, I'll give em a try see if I like em,
[ATTACH] Check these out, took it out of my 83 magna parts bike, looks like brand new on the inside and it fits perfectly on top my cylinder
What do you mean by hard brake like it's hard to pull or to touchy? I don't mind how my brakes feel now with the old ones
Sweet I didn't know you could replace just the glass, I'll send a message to him found a pretty sweet little video on bleeding and replacing brake...
I did read that brake line thread and I am planning on switching to ss lines, the bike was braking fine but the sight glass is all messed up so...
[ATTACH] [ATTACH] So I managed to get those screws out and when I looked inside I found this ugly mess, is that rubber piece suppose to look like...
Ok that's good to know, so I guess I did win my battle today I was just being impatient and lack of knowledge i also heard a ticking noise while...
Ahh ok sweet that's awesome then, I always thought if you can't turn choke off right away there's something wrong, so I should be able to leave it...
So second run I let it warm up for about 5 mins with the choke about half on, it was ideling at about 1200, but then I'd turn choke off and it...
This is my new sync tool, ugly as hell but it was $16 to make and worked like a charm [ATTACH]
