About to do a valve adj and the Shim Calculator file is no longer available. Anyone got a copy or a new location to download ?
I'm curious about what other bikes use the same shim diameter - Honda, Suzuki, Kawasaki ?
Contains Dimethyl Benzene, Methyl Salicylate,
Bringing an 81 Seca 750 back to life. Cleaned the carbs and before putting them back on found the air box boots hard as rock. Found some "Rubber...
Thanks for the quick replies, now to see if she'll turn over !!
Got a chance to pickup another Seca 750, for free, thats been sitting for years. The property owner has no ownership for it, a tenant abandoned...
Got the new one yesterday and it fits perfect. Took 2 weeks to come from China but the price is right.
I turfed the old one, had to use a punch and hammer to get to unlock.
Part numbers don't match up between Virago and Maxim/Seca using the new part numbers but with the old numbers they match up!!!
Looks to be the same as the one I have now (mine has a broken keyway). Price is right so I'll order one. I'll post back the results when I get it.
Looking for a replacement gas cap for my 82 Seca 750. Found these on fleabay, will it fit??? Gas Caps
I use a heat gun to warm up the post areas, then spray condensed air (used on computers) to spray the pin. Enough of the cold air spray will...
Got an oil leak at the bottom of the clutch cover on my 83 XJ1100. Got a new clutch cover gasket. When I remove the cover are the any special...
Got the manual but there's no mention of the stock pilot screw settings. Only says its preset. Anyone know the stock settings?
I hooked up a Honda coil in place and it works. Got a nice spark on #1. Funny though if I pull a spark plug wire off # 1 or #2 the engine will...
Did he clunk test and carb sync this morning, all tests ok. I have the key turned on (engine not running) and touched the #1 spark plug wire and...
Bike is all stock. I did a good cleaning of the carbs but no clunk test. What is the clunk test??
Bringing a Maxim back to life. Cleaned the carbs and the bike starts, idles fine with lots of power but backfires/misses on deceleration....
I found a list to download for free: http://www.4shared.com/dir/1570443/a2eb ... aring.html
Just what I needed, thanks.
Thanks for the info, I now know why it's so heavy !!! Where the best place to get a manual? All the carb hoses from the fuel tank and two...
Picked up an 82 Maxim in a yard sale for $100. In v.g. condition but its been sitting for a few years so needs carb overhaul, etc. Can't find...
Using the colortune and reading the spark plugs I got the bike to idle and return to the proper idle. Runs great now, thanks for all the info.
I forgot I had a colortune in the tool box. Just used it and got all the readings to a gas color blue flame. One thing I didn't do was bench...
81 Seca 750, just rebuilt the carbs, parts obtained from our friend on this site. Bike starts easily with choke' With the choke off it will...
Picked up a set of spare carbs for my 81 XJ750. They are in better shape than my current carbs but there's a lot of extra hoses. What are all...
Are all the XJ carbs the same size?. I believe my 81 Seca 750 has 35mm carbs.
Getting at the frame mounted master cyl is a pain. I'd prefer the handlebar mounted one, easier to service.
Thanks, just curious.
My 81 Seca 750 has the frame mounted MC. I happen to have a handlebar MC and lever from an FZ600. Can they be changed over without much hassle?
Where are the throttle shaft seals??
I put new vacum caps on, the old ones were hard as rock.
82 Seca 750, just did a carb cleaning as the bike wouldn't start without the choke on. Bike now starts easily and idles nicely at 1100 rpm. BUT...
I read the post about cleaning the jet in the float bowls, where can I get the drill bit to clean them?
Got the carbs off and the jet in the float bowls are plugged. I'll soak them in carb cleaner overnight and hopefully they'll be clear by morning!!
Just got an 81 Seca 750 and of course it doesn't run. Bike will sometimes start on full choke but stalls when given throttle. I'm going to...