I read thru the write up and saw the location and wire colors... But I didn't see the values of the 3 diodes and 1 resistor.
Can anyone please point me in the direction to find the values of the diodes in the block of a 81 550 maxim. Please and thank you!
Hello all! I'm working on a buddies bike 84 ltd 550 shaft. He unfortunately lost the rear hub drain screw and all the gear oil. That ended up...
the burleys work well but you will need to widen the lower mount and make a bushing for the top mount to take up the gap on the mounting stud. a...
wow! amazing work!!!
shoot i never get tired of showing her off! 81 xj550 Belvidere IL [img]
that looks like the hook you use to support the fuel hose going up to your gas tank. it mounts on the top hat using one of the screws. line it up...
if your just using it for a phone charger or something like that you'll be ok. when ever i take a long trip ill run one up to my tank bag so i can...
good tip! I can get about 20ish out of my max550 on reserve.
ah heck yeah!!! I went 2 years ago but missed last year. Im deff goin this time around!!! soooo many awesome two wheeled vehicles and cool people....
for your starting issue. are your handle bars painted? i believe your starter switch grounds to the bars. when you hit the button does it do...
hahahahahahahahahahahaha!!!
im done too. i unsuccessfuly navagated an atv and tore up the back of my head and busted my collar bone in 3 places! whoops! oh well i got 10k...
id say top it off and charge it up. if all else fails it just wont hold a charge.
Re: **Brute Bobb Build*** you're gonna like those shocks! I weigh 180 and they are just right! good stance too!
fantastic pics! I noticed the speed in the pic where you locked the throttle and snapped a few pics!
i used a spring loaded on also. i tried an electric and bent the piece that pushes the spale trying to make it work. keep the spring stapler firm...
hows your batt? leaving the valve set on prime may fill your crank case with gas if your carbs are not funct properly.
welcome from northern IL! if you're ever up in this direction let me know!
your rings are prob fine unless you notice a bit of smoke blowing out the exhaust. its it most likely your carbs. just read the how to on here and...
id deff spray it down after the pickle wipe! id like to see a vid in real time on an average chain.
HA! That is awesome! im goin to the store!
do they have a version for 7/8" bars instead of 1"? if so you could prob make them work.
a little. i had to widen the bottom mounts a hair and made a sleeve to take up the gap between the bolt and lower shock. then on the top a sleeve...
the solo seat is pretty easy you can follow the awesome thread on the boards or just cut and cover the orig. i love fiber glass (walmart) to...
well picture this with onlt one pipe! [img]
the shocks are a great height for me. im 5 8" and can sit flat footed with a slight bend in the knees while stopped. if I redo the padding of my...
yep new fender, sportster exhaust, royal enfield bars and the seat... the front half is stock the rear was fiber glassed the match the curve of...
welcome! fill out your details in case there is some one local that can lend a hand!
8 inch jesse james off of ebay! no cut outs, nice tubes in the inner curve for wires, unpainted! ive been looking at swaps for a good one but all...
Ive seen the same guy on a maxim a dozen or so times getting off 53 at kirchoff around 5. normally dressed in camo. I shouted across traffic the...
hey im a pin up! the ugliest ever! lol
I run a pair of the burly slammer shocks for a sportster. they are 10.5 and ride real nice on the soft setting. [img] with the wife on...
There are a few Jesse James fenders on eBay. That is where i got my rear
this is from the Wisconsin trip i took about a month ago. Luckily I didn't have to bring food! It was about 320mi each way. [img]
I was there last year with a few guys ill deff try and make it again! a ton of awesome rides up there!
[img] [img] heres the link to ebay where i got them http://cgi.ebay.com/ebaymotors/Royal-En ... ccessories
awesome color and design!! keep us posted
Awesome keep em commin!
Well if anyone on that route chimes in ill have my phone on me to look if i need to (fingers crossed i wont!!). Ill get some pics of the ride if...
Well Ive got a cousin having a bachelor party up in Athelstane, WI 54104! I live near Rockford IL so Ive got a nice lil trek in front of me!! I...
you sure sure the rear speakers are wired correctly? the may be reversed and canceling each other out.
you could cut extra slots into the collar of the muffler so there will be 4 slots perpendicular to the collar then use an exhaust clamp. tighten...
where is that? or are you referring to a night ride?
i put a sturdy shop towel over mine and gave some taps with a rubber mallet. it was nice using the shop rag since it was pretty evident when the...
do you get the relay to click when you hit the button?
thanks! they were just a hair out of being squared then i got them (prob from shipping) but a vise and beer mussles fixed them right up! [img]...
there are some good tips goin so far. make sure you mount solid, try and solidify the speaker compartments and deff run the amp. is there a gain...
if you pm me your address ill mail out some fat matt i have layin around! I did my whole car and have a lil left over!
im using the eliminator bars off eBay. they came with a u-shaped piece that thru the stock clamps and have another set on top....