Re: AIRHEAD VALVE ADJUSTMENT Part 2: The Tool vs. ZipTie -w/ Just buy the tool, it is a real life saver. I recently adjusted the valves on my '81...
I recently ordered parts to replace the valve shims on my 81 xj650LH. Cracked te valve cover and spent a while scraping that old paper gasket off....
Thanks for the input guys. As far as I know, only problem was a blown fuse. I plan on keeping the switch jumped because I plan to strip the bike...
Blew a MAIN fuse, not sure if this is my ONLY problem. Will be replacing this later tonight.
I recently had ripped my clutch safety cable (that cable that keeps you from starting in gear with the clutch "engaged"). I noticed that once it...
Thanks for the input guys. I ordered some kroil on amazon, and I plan on soaking ALL of the nuts and bolts (exhaust gaskets are being replaced so...
So I'm planning on attempting to remove this bolt myself in the next few days. I read other posts, and people were mentioning to use kroil to soak...
Well It turns out I am getting spark, but the exhaust isn't even getting close to warm. I pulled the plug caps off and trimmed a little wire to...
The other day I noticed a lack of power in the ol XJ. Pulled the plugs, and cylinder 3 isn't firing at all. I just replaced the ignition coil for...
Anyone have experience using an "ez-out" on something like this? I don't really want to invest in the chemical since I probably won't be using it...
Yesterday I noticed a small exhaust leak while riding the XJ around. When I got home, I came to find out that the bolt on my #4 exhaust header was...
Well I found out today that the ignition coil for cylinder 1 & 4 went kaput. As a result, neither cylinder was firing which I think is the reason...
I do get some increase in power...I just can't get enough power to go fast enough and get out of second gear. Another thing that happens that I...
I recently pulled the carbs from my bike, cleaned em up, bench sync, and passed a clunk test. The problem I have is there's a lot of hesitation in...
I actually got em out with some pb blaster, and then used a rubber band for some extra grip. I do plan on ordering all new screws, as well as at...
So I've decided it's time that the carbs come off this '81 XJ650LH. Got them apart (not off the rack), bowls and floats apart. Hats are off...
Earlier today while riding home from a cookout, my bike started to loss power, and lots of it. It would break up at all rpms an I just wanted to...
I purchased my first bike (1981 xj650LH) about a month ago. I want to do nothing more than ride every single day. I grabbed it for $800 from a guy...
Not sure if I'm able to "tap it back in." It seems as if the base of the filter is too small for the hole it needs to go into. It just slides in...
I recently overhauled my gas tank (cleaned, lined, debadged, painted) and I'm extremely happy with the results. The question I have has to do with...
One last question before I give in and get the OEM gas cap... I found a couple gas caps for a 750 virago (since the virago is a cruiser style, I...
Thanks chacal! I'm actually looking for some type of aftermarket gas cap. Something inexpensive, and easy, and preferably without a lock (don't...
So earlier today, I decided to apply a little stoner degreaser to the gas cap to clean it up (surface rust from the PO). After riding about 12...
I've been trying to remove the seat to my 1981 xj650 midnight maxim. According to the Haynes manual I should be putting my ignition key into the...
Thanks Saber, appears you are correct. Definitely a 650. First thing I need is a new set of tires. I see you're located in Reading, I live in...
I recently picked up what was advertised on craigslist AND the title as a "1981 XJ750 Midnight Maxim." It looks as though SOME modifications were...
