1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Carb gaskets- rubber or cardboard?

Discussion in 'XJ Technical Chat' started by broccili, Feb 11, 2012.

  1. broccili

    broccili Member

    Messages:
    39
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Southern Maine
    Are the Hitachi carb gaskets supposed to be a soft, pliable rubber, or a somewhat stiff plastic/cardboard?
     
    broccili, Feb 11, 2012
    #1
  2. MiCarl

    MiCarl Active Member

    Messages:
    4,373
    Likes Received:
    23
    Trophy Points:
    38
    Location:
    Livonia, MI (Metro Detroit)
    They're a fiber gasket, not rubber. Fairly stiff.
     
    MiCarl, Feb 11, 2012
    #2
  3. RickCoMatic

    RickCoMatic Well-Known Member

    Messages:
    13,843
    Likes Received:
    65
    Trophy Points:
    48
    Location:
    Massachusetts, Billerica
    Some Gaskets have "Natural" Fiber in them.
    After some time being compressed; they adhere to mating surfaces.

    To be able to remove the Bowls for adjustments and future cleaning; Paint the Base of the Carb, BOTH sides of the Gasket and the surface of the Bowl with a Light Machine Oil.

    The Oil will let the Gasket be compressed but NOT stick to either Carb Base of Fuel Bowl.
     
    RickCoMatic, Feb 11, 2012
    #3
  4. broccili

    broccili Member

    Messages:
    39
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Southern Maine
    That's a nice tip, thank you!
     
    broccili, Feb 11, 2012
    #4
  5. Vancouver_Vince

    Vancouver_Vince Member

    Messages:
    51
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Vancouver, BC, CANADA
    Vancouver_Vince, Apr 11, 2013
    #5

Share This Page