1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Carbs

Discussion in 'XJ Technical Chat' started by Kingston, Apr 18, 2012.

  1. Kingston

    Kingston New Member

    Messages:
    27
    Likes Received:
    1
    Trophy Points:
    1
    Location:
    Kingston, Ontario
    :roll: This winter I took off my carbs and cleaned them up. Cleaned the jets and checked the float levels. When I started the bike up the two outside cylinders fouled up and were wet. The two inside ones ran fine. I swapped the inside plugs to the outside and went for a 10 minute ride. Then both outside plugs starting to not run. Came home and pull the plugs out. The inside plugs were fine but the outside were dry, sparking but not getting any gas. What do I do next?
     
    Kingston, Apr 18, 2012
    #1
  2. adrian1

    adrian1 Active Member

    Messages:
    1,818
    Likes Received:
    6
    Trophy Points:
    38
    Location:
    Australia
    re-check the float levels
     
    adrian1, Apr 18, 2012
    #2

Share This Page