Chacal - Looking for Mikuni carb parts

how do I order some carb parts. I need one of the washers that goes under the main jet on the mikuni carbs for a 1985 maxim X, XJ700. Might could also use some needles, seats and floats? Any help appreciated.

 

ii) Mikuni Carb Floats and Float Needle Valves:


fs4) Aftermarket Mikuni float valve Needle Only...for those who wish to do an extreme-budget rebuild, you can buy the rubber-tipped float valve needle by itself (without its brass seat).

For use on all XJ550 models, all XJ700-X and XJ750-X models, all XJ900RK models with the clipped-to-the-float style seat, and all XJ1100 models:

HCP1670 Aftermarket Mikuni float valve Needle with retainer clip, each:
$ 8.50

HCP1670SET4 Aftermarket Mikuni float valve Needle with retainer clip, set of 4:
$ 29.00

kk) OEM and Aftermarket Mikuni Float Needle Valve Assembly---contains the float needle with retainer clip (if used), float valve brass seat, the seat o-ring, and the seat filter screen.

NOTE: XJ900RK models can use either a valve with a 2.0mm seat opening and which uses a non-clipped-to-the-float needle style, or they can use a valve with a larger 2.3mm seat opening and which uses a clipped-to-the-float style of needle. THE TWO STYLES ARE NOT INTERCHANGABLE---you cannot use one style seat with the other style needle. You CAN, however, interchange the complete needle/seat units on all XJ900RK (Mikuni BS33 series) carbs. However, you should use all four of the same style in a complete set of carbs. Generally speaking, we've seen the non-clipped needle and seat style valves (with the 2.0mm valve seat orifice) used mostly on North American models, and the clipped needle and seat style valves (with the 2.3mm valve seat orifice) used on the non-North American models.

HCP8562 OEM single float needle valve assembly, for all XJ700-X, XJ750-X. Also fits the XJ900RK with the 2.3mm orifice and the clipped-to-the-float style needle. Each:
$ 55.00

HCP8562SET4 OEM float needle valve assemblies, set of 4:
$ 199.00

HCP1673 Aftermarket single float needle valve assembly, for all XJ700-X, XJ750-X. Also fits the XJ900RK with the 2.3mm orifice and the clipped-to-the-float style needle. Each:
$ 16.00

HCP1673SET4 Aftermarket float needle valve assemblies, set of 4:
$ 57.00

HCP5192 OEM Mikuni float needle valve Seat O-Ring, tough and durable buna-N material. Fits all XJ550, XJ650 Turbo, XJ700-X, XJ750-X, XJ900RK, and XJ1100 models. Each:
$ 3.50

HCP5192SET4 OEM Mikuni float needle valve Seat O-Ring, tough and durable buna-N material, set of 4:
$ 10.50



HCP7406 Aftermarket Mikuni float needle valve Seat O-Ring, tough and durable buna-N material. Fits all XJ550, XJ650 Turbo, XJ700-X, XJ750-X, XJ900RK, and XJ1100 models. Each:
$ 1.50

HCP7406SET4 Aftermarket Mikuni float needle valve Seat O-Ring, tough and durable buna-N material, set of 4:
$ 4.50



fnv2) OEM and aftermarket Mikuni float needle valve SEAT FILTER. These small domed mesh screen filters snap onto the top of the float needle valve seat and help to keep crud, junk, and other kinds of cosmic debris out of the carbs. These filter screens are included in the replacement float needle valve assemblies and lower end rebuild kits listed above; but, if you want to re-use your original valve seats, we still recommend the replacement of these screens. Fits all XJ550, XJ650 Turbo, XJ700-X and XJ750-X models, XJ900RK, and XJ1100 models.


HCP5193 OEM Mikuni float valve needle seat FILTER SCREEN, use one per carb, each:
$ 8.50

HCP5193SET4 OEM Mikuni float valve needle seat FILTER SCREEN, use one per carb, set of 4:
$ 32.00



HCP2735 Aftermarket Mikuni float valve needle seat FILTER SCREEN, use one per carb, each:
$ 8.00

HCP2735SET4 Aftermarket Mikuni float valve needle seat FILTER SCREEN, use one per carb, set of 4:
$ 28.00

fs8) Aftermarket Mikuni Fuel Bowl FLOAT and FLOAT PIN, brand new replacement unit. Fits all XJ700-X models, all XJ900, and all XJ1100 models.

HCP1668 Mikuni Float & Pin Set, each:
$ 27.00

HCP1668SET4 Mikuni Float & Pin set, set of 4:
$ 102.00

----------

I quote the parts, so he doesn't have to... some of the time.