1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Dyna Coils

Discussion in 'XJ Technical Chat' started by OpaJim, May 20, 2007.

  1. OpaJim

    OpaJim New Member

    Messages:
    17
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Mena, AR
    Not long ago I bought Dyna Coils on eBay. They read 3.4 ohms on the
    primaries using several different multimeters, not 3.0 ohms. I don't want
    to try them if there is any chance of damaging the TCI or another component.
    Need some help with this!
    Thanks,
    Jim
    XJ Fleet
     
    OpaJim, May 20, 2007
    #1
  2. BlueMaxim

    BlueMaxim Active Member

    Messages:
    1,986
    Likes Received:
    4
    Trophy Points:
    38
    Location:
    Central Mississippi
    That is no problem. It is when the primary resistance goes below 2.5 that the TCI can be damaged. You can go up slightly on resistance but never down. Stock is 2.5 and the dyna's for our bikes (DC-1-1) are rated at 3ohms. Just up slightly. 3.4 is within the acceptable limit for our bikes.
     
    BlueMaxim, May 21, 2007
    #2

Share This Page