fuse holders

Hello.

Im just curious. Is it possible to replace the metal fuse holder on my 1982 xj750? One of them broke and I was hoping not to have to get a whole new fuse box. If so does anybody know where I can order the fuse holder from? Thanks in advance

Jake

 

We have them in stock!

HCP14606 OEM original fusebox FUSEHOLDER CLIP TERMINAL, fits into stock factory fuseboxes, crimp-on, open-barrel style tin-plated brass terminals fits all stock XJ-series fuseboxes that use glass fuses. Use 2 per circuit, a total of 8 per fusebox. Each:


HCP24811 Aftermarket fusebox FUSEHOLDER CLIP TERMINAL, fits into stock factory fuseboxes, crimp-on, open-barrel style brass terminals fits all stock XJ-series fuseboxes that use glass fuses. Use 2 per circuit, a total of 8 per fusebox. Each:



HCP23089 Aftermarket original-style fusebox FUSEHOLDER CLIP TERMINALS WITH WIRES, fits into stock factory fuseboxes. This set of terminals with attached wire leads will perfectly replace your commonly broken original fuseholder clips. This set of 2 clips with attached wire leads are for the MAIN CIRCUIT and has the proper 14-gauge solid red wire leads attached. Fuse not included. Fits all XJ models except XJ700, XJ750-X, and XJ1100 models. Wire leads will need to be spliced, soldered, or otherwise attached to your original wire leads (such as with the butt connectors listed above). Each set:


HCP23090 Aftermarket original-style fusebox FUSEHOLDER CLIP TERMINALS WITH WIRES, fits into stock factory fuseboxes. This set of terminals with attached wire leads will perfectly replace your commonly broken original fuseholder clips. This set of 2 clips with attached wire leads are for the SIGNALS CIRCUIT and has the proper 18-gauge solid brown wire leads attached. Fuse not included. Fits all XJ models except XJ700, XJ750-X, and XJ1100 models. Wire leads will need to be spliced, soldered, or otherwise attached to your original wire leads (such as with the butt connectors listed above). Each set:


HCP23091 Aftermarket original-style fusebox FUSEHOLDER CLIP TERMINALS WITH WIRES, fits into stock factory fuseboxes. This set of terminals with attached wire leads will perfectly replace your commonly broken original fuseholder clips. This set of 2 clips with attached wire leads are for the IGNITION CIRCUIT and has the proper 18-gauge red with white tracer stripe wire leads attached. Fuse not included. Fits all XJ models except XJ700, XJ750-X, and XJ1100 models. Wire leads will need to be spliced, soldered, or otherwise attached to your original wire leads (such as with the butt connectors listed above). NOTE: some models used solid brown wires for the ignition circuit, in which case you can either use these (which we recommend doing), or, you can use the HCP23090 set above. Each set:


HCP23092 Aftermarket original-style fusebox FUSEHOLDER CLIP TERMINALS WITH WIRES, fits into stock factory fuseboxes. This set of terminals with attached wire leads will perfectly replace your commonly broken original fuseholder clips. This set of 2 clips with attached wire leads are for the HEADLIGHT CIRCUIT and has the proper 16-gauge red with yellow tracer stripe wire leads attached. Fuse not included. Fits all XJ models except XJ700, XJ750-X, and XJ1100 models. Wire leads will need to be spliced, soldered, or otherwise attached to your original wire leads (such as with the butt connectors listed above). NOTE: some models used solid brown wires for the headlight circuit, in which case you can either use these (which we recommend doing), or, you can use the HCP23090 set above. Each set:

 

All that said... you really should replace the fusebox. Do it once and then no more worries about random issues from brittle, oxidized fuse clips. Plus, if you need a fuse, it's a lot easier to find ATO fuses than glass fuses these days.

 

rf3) Aftermarket replacement GLASS AGC FUSES for use with the stock original fuseboxes or fuse holders.

NOTE: the following replacement fuses are slightly longer than the stock, original fuses (you still have those in there????!) but the additional length will not cause any problems with use.


HCP7144 Aftermarket glass tube 5-AMP AGC FUSE, each:
$

HCP1276 Aftermarket glass tube 10-AMP AGC FUSE, each:
$

HCP7145 Aftermarket glass tube 15-AMP AGC FUSE, each:
$

HCP1275 Aftermarket glass tube 20-AMP AGC FUSE, each:
$

HCP7143 Aftermarket glass tube 30-AMP AGC FUSE, each:
$


The following fuses are the original “short” style fuses, and will certainly get your bike to the 11th level! Note that these fuses are current manufacturer (not 30 year-old fuses!):

HCP23094 Aftermarket glass tube 10-AMP ORIGINAL FUSE, each:
$

HCP23095 Aftermarket glass tube 20-AMP ORIGINAL FUSE, each:
$

HCP24653 Aftermarket glass tube 30-AMP ORIGINAL FUSE, each:
$

 

I didn't mean from you, Len. I meant when you're stranded at a 7-11 or Wal-Mart.

 

Yuk, stranded at WalMart, what a nightmare................

It's why you should always carry spares with you!