1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Jumpy Tach

Discussion in 'XJ Technical Chat' started by bballantyne, Jun 18, 2014.

  1. bballantyne

    bballantyne New Member

    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    canada
    Does any one know what would be causing the tach to jump around when it reaches between 4 & 5000 rpm on an 82 Seca750? It works normal up to that rpm.
     
    bballantyne, Jun 18, 2014
    #1
  2. lacucaracha

    lacucaracha Member

    Messages:
    359
    Likes Received:
    1
    Trophy Points:
    18
    Location:
    Napa, CA
    Those are electronic, so maybe it's grounding out? I'd make sure all your connections are clean, tight, and there's no exposed or fused wires.

    After that you can look at the needle.
     
    lacucaracha, Jun 18, 2014
    #2
  3. lacucaracha

    lacucaracha Member

    Messages:
    359
    Likes Received:
    1
    Trophy Points:
    18
    Location:
    Napa, CA
    Those are electronic, so maybe it's grounding out? I'd make sure all your connections are clean, tight, and there's no exposed or fused wires.

    After that you can look at the needle.
     
    lacucaracha, Jun 18, 2014
    #3
  4. bballantyne

    bballantyne New Member

    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    canada
    Thanks I will check the connections, this bike sat outside for 3 year's.
     
    bballantyne, Jun 18, 2014
    #4

Share This Page