1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Master cylinder help

Discussion in 'XJ Technical Chat' started by cayuse911, May 14, 2007.

  1. cayuse911

    cayuse911 New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    North Jersey
    will a master cylinder from mikesxs.com for an xs 650 fit an 82 maxim 550? or does anyone know where i can get one fast? any help would be appreciated
     
    cayuse911, May 14, 2007
    #1
  2. knight_007

    knight_007 New Member

    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Dar-es-salaam,Tanzania,East Africa
    knight_007, May 17, 2007
    #2
  3. xjyamaha

    xjyamaha Member

    Messages:
    321
    Likes Received:
    16
    Trophy Points:
    18
    Location:
    Omaha, NE
    i rebuilt my caliper with all new seals and cleaned very well, and tonight i put in my new master cylinder rebuild kit in, followed by a good cleaning.
    Before i put in my rebuild kit, fluid would spurt out the pressure release hole inside the resevoir and after my rebuild kit, it still does it and the brakes still arent too tight.
    I'm pretty sure i got all the air out but still, why would fluid still spurt out my pressure release notch if i had all new seals and pieces all around.
     
    xjyamaha, May 17, 2007
    #3

Share This Page