1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Necesito ayuda

Discussion in 'XJ Technical Chat' started by Carlos gonzalez, Apr 30, 2025.

  1. Carlos gonzalez

    Carlos gonzalez New Member

    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Venezuela
    Buenas noches tengo un maxin xj700 enfriado por agua lo compre con instalación eléctrica muy dañada y cables destruidos por favor habrá alguna manera de encender la moto haciendo un bypass para prenderla sin el uso de los interruptores y rele de encendido gracias.
     
    Carlos gonzalez, Apr 30, 2025
    #1
  2. Roast644

    Roast644 Well-Known Member

    Messages:
    481
    Likes Received:
    460
    Trophy Points:
    63
    Location:
    WASHINGTON
    Run a jumper wire directly from the battery to the red/white wire on the TCI unit. Leave the red/white wire plugged in when you do this. TCI now has power for spark. You can crank the bike by jumping the big terminals on the starter solenoid with a short wire or wrench.

    If still no spark, try unplugging the black/white wire from the TCI during this test. If it now sparks, that indicates your sidestand relay is bad.
     
    Roast644, May 4, 2025
    #2

Share This Page