1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Oil Press. and High beam light not working

Discussion in 'XJ Technical Chat' started by vincentmoy, Jun 29, 2009.

  1. vincentmoy

    vincentmoy Member

    Messages:
    40
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Anchorage, Alaska
    Hi all,

    I seems to have a lot of minor problem with the bike so please pardon me.

    The 2 lights has never work since I got the bike. I tested the continuity on the 6 pin and seems like the Oil Press. wire has no continuity at all.

    Will that be the oil press. switch or the harness?

    My 2nd Q. is if I leave it this way, will it do any harm?

    Thanks
     
    vincentmoy, Jun 29, 2009
    #1
  2. tylernt

    tylernt Member

    Messages:
    66
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Idaho
    The headlight indicator will do no harm, but I wouldn't ride without a working oil light. If your engine somehow ended up with low oil pressure, you would destroy the engine. The bulbs are probably burned out, I would check that first before digging into the harness or playing with the switch.
     
    tylernt, Jun 29, 2009
    #2

Share This Page