1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

replacing MC with aftermarket

Discussion in 'XJ Modifications' started by engraverwilliam, Feb 21, 2015.

  1. engraverwilliam

    engraverwilliam Member

    Messages:
    192
    Likes Received:
    15
    Trophy Points:
    18
    Location:
    Baldwin Hills, South Los Angeles
    Any way to bypass/cancle out the break warning on the Atari?
    I read something here on the old boards but the search isnt helping me at all
     
    engraverwilliam, Feb 21, 2015
    #1
  2. Polock

    Polock Well-Known Member

    Messages:
    9,751
    Likes Received:
    2,097
    Trophy Points:
    113
    Location:
    Beaver Falls, PA
    the light was hooked to a magnetic switch in the MC. a ring shaped magnet floated up/down over a pillar in there. the switch wires need to be together or apart (i forget which) but those wires will defeat the brake warning
     
    Polock, Feb 21, 2015
    #2
  3. hogfiddles

    hogfiddles XJ-Wizard, Host-Central NY Carb Clinic Moderator Premium Member

    Messages:
    14,821
    Likes Received:
    5,151
    Trophy Points:
    113
    Location:
    near utica, new york
    There is a fester button on the front of the cluster... When the light starts blinking, press it once or twice. Iirc, pressing it once make the light stay on steady, pressing it twice turns it off til the next time you start the bike, of the circuitry tells it to come on again
     
    hogfiddles, Feb 24, 2015
    #3

Share This Page