1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

[VIDEO] Full video of flyby vid, crappy editing though

Discussion in 'Hangout Lounge' started by turbobike, Feb 27, 2008.

  1. turbobike

    turbobike Member

    Messages:
    225
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Grand Island, Nebraska
    http://www.youtube.com/watch?v=A4Lqr2rIc9g


    If you've seen my flyby vid, this might thrill you? Probably not.

    I did a bunch of runs with 1 camera pointed in two directions, and edited them together to create this vid ;)

    but more vid of my turbo, not new vid.

    I have some new vid, but i don't wanna over-post.
     
    turbobike, Feb 27, 2008
    #1
  2. rpgoerlich

    rpgoerlich Member

    Messages:
    837
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Katy, Tx
    So the RH Flange on the Turbo where the RH muffler would bolt up has a plate welded over it ?

    The play in the Turbo you showed in the Vid Fixed ?
     
    rpgoerlich, Feb 27, 2008
    #2
  3. turbobike

    turbobike Member

    Messages:
    225
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Grand Island, Nebraska
    there is a cover plate bolted up to it, it's a flange that had the hole welded shut

    and shaft play in the turbo wasn't beyond specs. So no. I don't have my boost gauge hooked up so I don't know what i'm boosting too, but I got up to above 85mph pretty quick.

    No leaks, starts right up, builds boost fine.
     
    turbobike, Feb 27, 2008
    #3

Share This Page