1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ Exhaust Port Covers (550,650)

Discussion in 'XJ 3D Printing & STL Files' started by Dan Gardner, Apr 20, 2022.

  1. Dan Gardner

    Dan Gardner Well-Known Member Premium Member

    Messages:
    1,191
    Likes Received:
    573
    Trophy Points:
    113
    Location:
    Minneapolis, MN
    These are covers/blanks for exhaust ports.

    This particular part was designed and tested on an XJ650RJ (non-YICS) engine. This engine's exhaust ring nut (PN 4H7-14612) is shared with several other 550s and 650x and in theory would work on those. Fitment on any other engines is not known at this time - there may be some different dimensions for 700/750/900 engines.

    It shouldn't need to be said, but do not attempt to run the engine with the blanking covers in place.

    Designed using FreeCAD. Printed on FlashForge Creator Pro. File types included in zip: FCStd, stl, x3d.

    20220419_223210162_iOS.jpg

    20220419_223228598_iOS.jpg

    THE FILES ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
     

    Attached Files:

    Dan Gardner, Apr 20, 2022
    #1

Share This Page