1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ Fuel Petcock Blank (550, 650, 750, 1100)

Discussion in 'XJ 3D Printing & STL Files' started by Dan Gardner, Apr 26, 2022.

  1. Dan Gardner

    Dan Gardner Well-Known Member Premium Member

    Messages:
    1,191
    Likes Received:
    573
    Trophy Points:
    113
    Location:
    Minneapolis, MN
    This is a blank for the smaller petcocks used on most 550, 650, 750, and 1100. The measurement of the base is 21mm x 55mm.

    If using to contain a liquid (such as for interior-only electrolysis or a tank full of Evapo-Rust), then a gasket material of some sort may be required.

    Warning: DO NOT use while operating the bike or with any fuel in the tank. This is designed for plugging the hole while working on the gas tank only. If you try to use this while running or operating the bike with fuel in the tank, very bad things could happen.

    Designed using FreeCAD. Printed on FlashForge Creator Pro. File types included in zip: FCStd, stl, x3d.

    XJ65FPB.jpg

    THE FILES ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
     

    Attached Files:

    Dan Gardner, Apr 26, 2022
    #1
    kalinin68 and Huntchuks like this.

Share This Page