XJ Intake Port Covers (650,700,750,900)

These covers go in place of the intake boots and cover the intake ports for cleaning, painting, etc.

You can put Gorilla tape (or similar) over the ports and then cover with these covers to create a very tight seal.

They should fit most of the air-cooled larger casting XJ engines that use the 4H7-13556 intake boot gasket - 650, 700 (airhead), and 750. 550, 600, and 900 use different gaskets and may or may not work.

The 900 in the post title was an error. It is not currently known if these will work on 900s.

Models that should fit include:

• 1980 XJ650G
• 1981 XJ650H
• 1982 XJ650J
• 1983 XJ650K
• 1981 XJ650LH
• 1982 XJ650RJ
• 1982 XJ750J
• 1983 XJ750K
• 1983 XJ750MK
• 1981 XJ750RH
• 1982 XJ750RJ
• 1983 XJ750RK
• 1985 XJ700N
• 1986 XJ700S

Designed using FreeCAD. Printed on FlashForge Creator Pro. File types included in zip: FCStd, stl, x3d.





THE FILES ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.

 

I just thought of another use for printed parts. Covers for petcock and fuel sensors for tank cleaning purposes!

 

Right on! Some of those are in my queue. Stay tuned.