1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ PARTS CATALOG, SECTION Q: ACCESSORIES

Discussion in 'XJ4Ever - Supporting Vendor' started by chacal, Oct 11, 2013.

Thread Status:
Not open for further replies.
  1. chacal

    chacal Moderator Moderator Supporting Vendor Premium Member

    Messages:
    8,866
    Likes Received:
    1,780
    Trophy Points:
    113
    Location:
    The room where it happened
    SECTION Q:

    ACCESSORIES:

    --Crash Guards.

    --Bike Covers.

    --Transport.



    CRASH GUARDS:

    Also known as engine guards or “case savers”, these guards provide a level of protection to the engine crankcase and in particular the forward side covers against scratches or fractures in the case of minor spills, unanticipated bike drops, etc.

    Be aware though, that in the case of a high-speed or violent crash, all types of engine guards are designed to be the “sacrificial lamb”, and will most probably be damaged to some extent, and may be destroyed beyond use, or, depending on the severity of the event, may not protect the engine or bike frame from damage.

    NOTE: guards typically will not fit bikes with factory side fairings (XJ650 Turbo, XJ750D, or XJ750 Seca models using the large factory “sport” fairing with the lower wind-deflector “legs”, and may or may not accept “forward controls” systems.



    2-point OEM-reproduction Crash Guards:

    HCP25519 Aftermarket engine case protection CHROME CRASH GUARDS SET. This matched LH/RH set is a correct reproduction of the factory optional 1AA-W0741-00-00 2-tube, 2-point mounting guards, and comes with all mounting hardware and installation instructions. Designed for all XJ700 and XJ750-X models, they feature the correct 1” diameter tube, the “stepped” lower mounting flange, and the 1.25” diameter horizontal top bar that can double as a long-distance riding “foot rest”. Installation is easy: https://www.xjbikes.com/forums/thre...inic-11-june-9-2018.118486/page-9#post-602453
    $ 239.95



    2-point “Mad Max” Crash Guards:

    These “Mad Max” style guards are a great lower-cost guard, and provide a basic level of protection against unanticipated bike drops and other such minor catastrophes. One 7/8” diameter main u-shaped tube is cross-braced by 3 smaller half-tubes and forms an imposing “face-mask” around the lower front engine area. Beautifully chrome-plated, they’ll intimidate your opponents while performing their job with style and grace.

    Please note that these 2-point mounting crash guards are nowhere near as strong and protective as the Road-Rage style (3-mounting points) guards listed further below.


    HCP25145 Aftermarket engine case protection ”MAD MAX” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all XJ550 models.
    $ discontinued

    HCP25147 Aftermarket engine case protection ”MAD MAX” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all XJ650RJ Seca, XJ650 Euro, 1981-83 XJ750 Seca, and all XJ750 Euro models.
    $ 159.95

    HCP25148 Aftermarket engine case protection ”MAD MAX” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all XJ750 Maxim and Midnight Maxim models.
    $ 159.95

    HCP25149 Aftermarket engine case protection ”MAD MAX” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all 1984 XJ750RL Seca models and all XJ900 models. NOTE: will not fit models equipped with chin spoiler/air dam.
    $ 159.95

    HCP25150 Aftermarket engine case protection ”MAD MAX” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all XJ1100 and all XS1100 models.
    $ 159.95




    3-point “Road Rage” Mounting Guards:

    These “Road Rage” style guards are the strongest guards available, and will provide an exceptional level of protection against minor spills, unanticipated bike drops, etc. And they look like they mean business, even while your bike is parked! Three separate frame mounting-points insures strength, while the three cross-braced, 1” diameter, show-chrome-plated tubes creates a tough, formidable barrier around the lower engine area.

    https://www.xjbikes.com/forums/threads/engine-guard-bars-80-xj650.125705/#post-632247


    HCP24845 Aftermarket engine case protection ”ROAD RAGE” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all XJ550 models.
    $ 229.95

    HCP24846 Aftermarket engine case protection ”ROAD RAGE” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all XJ650 Maxim and Midnight Maxim models.
    $ 229.95

    HCP24847 Aftermarket engine case protection ”ROAD RAGE” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all XJ650RJ Seca, XJ650 Euro, 1981-83 XJ750 Seca, and all XJ750 Euro models.
    $ 229.95

    HCP25112 Aftermarket engine case protection ”ROAD RAGE” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all XJ700 and XJ750-X models.
    $ 239.95

    HCP24848 Aftermarket engine case protection ”ROAD RAGE” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all XJ750 Maxim and Midnight Maxim models.
    $ 229.95

    HCP24849 Aftermarket engine case protection ”ROAD RAGE” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all 1984 XJ750RL Seca models and all XJ900 models. NOTE: will not fit models equipped with chin spoiler/air dam.
    $ 229.95

    HCP26297 Aftermarket engine case protection ”ROAD RAGE” CHROME CRASH GUARDS. Matched LH/RH set comes with all mounting hardware and installation instructions, and will properly fit all 1978-81 XS1100 models and 1982-84 XJ1100 models.
    $ 239.95
     
    Last edited: Sep 21, 2022
  2. chacal

    chacal Moderator Moderator Supporting Vendor Premium Member

    Messages:
    8,866
    Likes Received:
    1,780
    Trophy Points:
    113
    Location:
    The room where it happened
    BIKE COVERS:

    As you've probably realized by now, your bike represent a substantial investment----of both time andmoney (and sometimes, it seems like it's mostly money, doesn't it!). Well, like any valuable investment, you should probably take the proper steps to protect that investment, and there's no better way than with one of these high-quality BIKE COVERS, helping to keep dirt, grime, and especially moisture away from where they don't belong.

    Available in a variety of materials, each one is suited for an intended purpose, whether it's just inside-only storage or all-weather protection. The top-of-the-line Guardian Weatherall cover can be used immediately after riding (on a hot bike), and even has provisions for a cover alarm........if it goes off, you get your baseball bat ready!

    Quality protection at affordable prices.......now that's an intelligent way to protect any investment.


    Inside-Use-Only Covers:

    HCP10801 Aftermarket indoor-use BASIC COVER, this soft, breathable flannel-like material cover is soft, won't scratch your paint, is lightweight, and is designed as a "throw-it-over" type of un-fitted cover (no elastic seams, vents, etc.). Generous sizing will fit all stock XJ-series bikes without aftermarket "stand-up" windscreens, saddlebags, luggage racks, etc. The perfect solution for long-term indoor storage.
    $ 69.95

    HCP10817 Aftermarket indoor-use BASIC COVER, same features as the HCP10801 cover above but this slightly larger size should be used on any XJ-series bikes equipped with aftermarket "stand-up" windscreens, saddlebags, luggage racks, etc.
    $ 79.95



    Standard Indoor/Outdoor-Use Covers:

    HCP10798 Aftermarket indoor- or outdoor-use STANDARD BIKE COVER, this heavyweight all-weather cover features a water-repellent polyester outer skin, backed by a soft 65/35 polyester-cotton inner liner to guard against scratches or damage. Semi-fitted design has an elastic bottom seam, air vents, sewn-in security-cable grommets, and an extra-soft windscreen liner. Generous sizing will fit all stock XJ-series bikes without aftermarket "stand-up" windscreens, saddlebags, luggage racks, etc. Comes with a storage bag. A very cost-effective solution for long-term indoor storage.
    $ 89.95

    HCP10800 Aftermarket indoor- or outdoor-use STANDARD BIKE COVER, same features as the HCP10798 cover above but this slightly larger size should be used on any XJ-series bikes equipped with aftermarket "stand-up" windscreens, saddlebags, luggage racks, etc.
    $ 99.95



    Deluxe Indoor/Outdoor-Use Covers:

    HCP10803 Aftermarket indoor- or outdoor-use BIKE COVER, this ultra-weight, all-weather, top-of-the-line cover features a water-resistant polyester outer skin and undercoat, backed by a super-soft inner liner to guard against scratches or damage. Semi-fitted design has heat-sealed seams, a sewn elastic hem, multiple air vents, security-cable grommets and a D-ring under-bike strap, and features aluminized lower panels that allow for the cover to be used even while the engine and exhaust are still hot. Built-in alarm pocket allows for the use of the HCP10801 Cover Alarm listed below. Generous sizing will fit all stock XJ-series bikes without aftermarket "stand-up" windscreens, saddlebags, luggage racks, etc. Comes with a storage bag. Limited lifetime warranty.
    $ 129.95

    HCP10804 Aftermarket indoor- or outdoor-use DELUXE BIKE COVER, same features as the HCP10803 cover above but this slightly larger size should be used on any XJ-series bikes equipped with aftermarket "stand-up" windscreens, saddlebags, luggage racks, etc.
    $ 139.95


    HCP10805 Aftermarket deluxe bike cover ALARM, for use with the HCP10803 or HCP10804 Deluxe Bike Covers listed above. Easy snap-ring installation is powered by a single 9V battery (not included), and will emit an ear-bleeding 130dB siren if it is disturbed. The Standard Covers could be modified to accept this alarm by the addition of a small internal "d-ring" that the snap closure on this alarm could be attached to.
    $ 59.95




    CARGO STRAPS AND NETS:

    These handy elastic CARGO STRAPS and NETS allow you to securely tie down small bags or luggage onto luggage racks and the like.


    HCP13001 Aftermarket black elastic CARGO NET, with six black plastic-coated metal J-hooks on each end. Relaxed length is about 13" square and can be stretched to almost 25" across. Great for use with factory or aftermarket luggage racks. Each:
    $ 17.95


    HCP13002 Aftermarket black elastic BUNGEE CORD, with black plastic-coated metal J-hooks on each end. Relaxed length is 12" and can be stretched to almost 20". Each:
    $ discontinued

    HCP13003 Aftermarket black elastic BUNGEE CORD, with black plastic-coated metal J-hooks on each end. Relaxed length is 18" and can be stretched to almost 28". Each:
    $ discontinued

    HCP13004 Aftermarket black elastic BUNGEE CORD, with black plastic-coated metal J-hooks on each end. Relaxed length is 24" and can be stretched to almost 40". Each:
    $ discontinued

    HCP13005 Aftermarket black elastic 4-WAY BUNGEE CORD, with black plastic-coated metal J-hooks on each end. Relaxed length is 24" and can be stretched to almost 40". Each:
    $ discontinued




    BIKE TRANSPORT:

    Sure, bikes get damaged while being ridden (or dropped), but you'd be surprised how often they also get dropped when they're traveling zero miles-per-hour, too............like in the back of a pick-up truck bed or on a trailer. The proper use of quality TIE-DOWN STRAPS will prevent this, and for even more security, you can use the patented CYCLE DOCK that makes loading and un-loading a bike a truly 1-man job.


    Tie-Down Straps:

    Non-ratcheting tie-downs feature a positively locking cam buckle to keep the strap cinched down, while ratcheting tie downs feature a positive-lock ratchet mechanism to provide easier, and more secure, lock-down of your bike.
    It's recommended that you use 2 ratcheting tie-downs per bike, and have some of the non-ratcheting types available for other purposes.


    HCP12979 Aftermarket non-ratcheting, cam-buckle type LIGHT-DUTY TIE-DOWN STRAPS, 1" wide aircraft-grade black nylon webbing features heavy-duty thread sewn in a "Box-X " pattern for maximum strength, and each strap is 6' long. One end of the strap has a 3/8" wide rubber-coated chrome-plated steel J-hook, while the other end has an un-coated steel hook. Sold as a pair.
    $ 17.95

    HCP12980 Aftermarket non-ratcheting, cam-buckle type LIGHT-DUTY TIE-DOWN STRAPS, 1" wide aircraft-grade red nylon webbing features heavy-duty thread sewn in a "Box-X " pattern for maximum strength, and each strap is 6' long. One end of the strap has a 3/8" wide rubber-coated chrome-plated steel J-hook, while the other end has an un-coated steel hook. Sold as a pair.
    $ 17.95


    HCP12983 Aftermarket non-ratcheting, cam-buckle type HEAVY-DUTY TIE-DOWN STRAPS, 1" wide webbing is rated at 1200-pounds of strength, and each strap is ???? long. Both ends of the strap have a 3/8" wide rubber-coated steel J-hook, while the other end has an un-coated steel hook. Black nylon webbing. Sold as a pair.
    $ 38.95

    HCP12982 Aftermarket non-ratcheting, cam-buckle type HEAVY-DUTY TIE-DOWN STRAPS, 1" wide webbing is rated at 1200-pounds of strength, and each strap is ???? long. Both ends of the strap have a 3/8" wide rubber-coated steel J-hook, while the other end has an un-coated steel hook. Red nylon webbing. Sold as a pair.
    $ 38.95




    HCP12985 Aftermarket ratcheting style STANDARD-DUTY TIE-DOWN STRAPS, 1" wide aircraft-grade black nylon webbing features heavy-duty thread sewn in a "Box-X " pattern for maximum strength, and each strap is 6' long. Sold as a pair.
    $ 24.95

    HCP12986 Aftermarket ratcheting style STANDARD-DUTY TIE-DOWN STRAPS, 1" wide aircraft-grade red nylon webbing features heavy-duty thread sewn in a "Box-X " pattern for maximum strength, and each strap is 6' long. Sold as a pair Sold as a pair.
    $ 24.95



    HCP12987 Aftermarket ratcheting and retracting HEAVY-DUTY TIE-DOWN STRAPS, 1-7/8" wide webbing is rated at 1200-pounds of strength, and each strap is 72" long. Unique self-retracting design makes the use of these tie-downs much simpler and safer to use. One end of the strap has a 3/8" wide rubber-coated steel S-hook, while the other end is a pivoting retractor housing which can be permanently mounted to your trailer or pick-up bed, or can be adapted for portable use with the optional Extension Hooks below. Black webbing. Sold as a pair.
    $ 179.95

    HCP12988 Aftermarket EXTENSION HOOKS for the above retracting tie-down strap units. 9" long heavy duty strap has an spring-loaded, vinyl-coated steel S-hook on one end; the other end of the strap has a flat mounting plate that can be attached to the vehicle floor or to the retractor housing. Black webbing. Sold as a pair.
    $ 29.95




    Wheel Locking Devices:

    One of the biggest problems with loading and securing a motorcycle into a trailer or vehicle is that it takes two people.......and as we all know, good help is certainly hard to find!

    To solve this problem, we offer this innovative product called a CYCLE DOCK, and that pretty well describes what it does. Using the bikes own weight, it has a pivoting wheel clamp that "locks" the front tire into a receiving cradle when the front tire passes over the clamp, thus firmly grabbing the front wheel and locking it into a restrained position that will keep the bike upright all by itself! This allows a single operator to dismount the bike and tie it down (or release it from the tie-downs) without help from another person. DIY at it's best!

    The docking mechanism itself is non-permanently attached to a fixed mounting rail, so the dock can be moved to different positions on a multi-rail trailer, or from vehicle-to-vehicle, for maximum usefulness. Complete system comes with two mounting rails and the docking mechanism.

    We use this system on our trailers, and it's the handiest thing since sliced bread.......


    HCP12961 Aftermarket CYCLE DOCK, comes with clamping dock unit, two mounting rails, and usage instructions.
    $ 529.95

    HCP12964 Aftermarket Cycle-Dock additional MOUNTING RAIL....the more rails you have, the more places you can use the portable clamping dock unit. For instance, if you have a three-bike trailer, you would want to have three mounting rails, one for each bike "slot". Each:
    $ 99.95

    HCP12962 Aftermarket Cycle-Dock replacement pivoting clamp PIVOT PIN.
    $ 27.95
     
    Last edited: Jun 4, 2023
  3. chacal

    chacal Moderator Moderator Supporting Vendor Premium Member

    Messages:
    8,866
    Likes Received:
    1,780
    Trophy Points:
    113
    Location:
    The room where it happened
    ..
     
  4. chacal

    chacal Moderator Moderator Supporting Vendor Premium Member

    Messages:
    8,866
    Likes Received:
    1,780
    Trophy Points:
    113
    Location:
    The room where it happened
    ..
     
  5. chacal

    chacal Moderator Moderator Supporting Vendor Premium Member

    Messages:
    8,866
    Likes Received:
    1,780
    Trophy Points:
    113
    Location:
    The room where it happened
    ..
     
Thread Status:
Not open for further replies.

Share This Page