1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ Pickup Coil Wiring Plug

Discussion in 'XJ 3D Printing & STL Files' started by Dan Gardner, Apr 20, 2022.

  1. Dan Gardner

    Dan Gardner Well-Known Member Premium Member

    Messages:
    1,381
    Likes Received:
    670
    Trophy Points:
    113
    Location:
    Minneapolis, MN
    A little blanking plug for sealing up the port where the pickup coil wires go through.

    Built and tested for an XJ650RJ. Should work on all 650 and 750. Good chance it will work for 700 and 900, but not certain.

    This part is small and depending on your printer it may need some fine tuning with a file to get it to fit perfectly.

    Designed using FreeCAD. Printed on FlashForge Creator Pro. File types included in zip: FCStd, stl, x3d.

    20220420_021227388_iOS.jpg

    20220420_021727016_iOS.jpg

    20220420_021453366_iOS.jpg
    Pickup coil plug on left, alternator port plug on right.

    THE FILES ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
     

    Attached Files:

    Dan Gardner, Apr 20, 2022
    #1
  2. Dantoys

    Dantoys New Member

    Messages:
    28
    Likes Received:
    8
    Trophy Points:
    3
    Location:
    Williamsport, PA
    ok, this may be a silly question. Why would you plug the hole? unless you found a way to run without the pickup coil.... This could solve my problem, as my pickup coil has gone bad, and I cannot find a replacement... please enlighten me. Thanks.
     
    Dantoys, Jul 22, 2022
    #2
  3. Dan Gardner

    Dan Gardner Well-Known Member Premium Member

    Messages:
    1,381
    Likes Received:
    670
    Trophy Points:
    113
    Location:
    Minneapolis, MN
    These are designed to be used during the restoration process - while power washing, blasting, painting, that sort of thing.
     
    Dan Gardner, Jul 22, 2022
    #3

Share This Page